Fluke
Fluke FLK-9MM/20M 9 mm 20 m Probe Borescope
A 20 m long, 9 mm diameter dual-view videoscope probe with 640 x 480 resolution and 75 degree field of view, compatible with Fluke DS701 and DS703 models
- Inspect deep cavities with 20 m reach
- Capture clear detail using 640 x 480 resolution
- View wide areas through 75 degree field of view
- Examine near and far with .5 to 3.5 in focus range
- Fit tight openings via 9 mm probe diameter
Compatible DS701/DS703 Videoscope Probe
This Fluke videoscope probe connects directly to DS701 and DS703 series inspection cameras. It extends the reach of compatible units for visual examination of internal cavities, pipes and machinery. Technicians in maintenance, HVAC and automotive roles use it to capture still images and video in confined spaces.
Dual-view 9 mm shaft for straight
The dual-view camera provides forward and lateral perspectives without rotating the probe. This suits engineers who need to inspect weld seams, valve seats or bearing surfaces from multiple angles. Users requiring a smaller diameter for tighter bores or a longer reach beyond twenty metres should consider alternative probe models.
Twenty-metre shaft length defines maximum
The 20 m flexible shaft sets the furthest point the camera can reach from the handset. Combined with a 75-degree field of view and a focus range of 0.5 to 3.5 inches, it determines whether a specific internal feature can be visualised. Verify that this length matches the access requirements of your application before purchase.
Highlights
- Inspect deep cavities with 20 m reach
- Capture clear detail using 640 x 480 resolution
- View wide areas through 75 degree field of view
- Examine near and far with .5 to 3.5 in focus range
- Fit tight openings via 9 mm probe diameter
Specifications
| Brand | Fluke |
|---|
Questions about this item
Which Fluke videoscope base unit is required to operate the FLK-9MM/20M probe?
The probe is compatible with Fluke DS701 and DS703 series videoscopes, including the DS703 FC model, and will not function without one of these base units.
Can the 9 mm diameter probe fit through the same access points as my older 6 mm inspection camera?
At 9 mm (0.35 in) diameter this probe is thicker than a 6 mm camera, so it will not fit through openings sized for the smaller device.
How do I verify the dual-view camera is functioning correctly after connecting it to my DS703?
Power on the videoscope and confirm both forward and side views appear on the display with a 640 x 480 resolution image focused between 0.5 in and 3.5 in.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
