Fluke
Fluke FLK-8.5MM/3M Borescope Probe 8.5mm 3m DS701 DS703
An 8.5 mm videoscope probe with 3 m shaft, 1280 × 720 camera, 75 ° field of view, and 1.39 – 4.4 in focus range for DS701/DS703
- Forward and side view for versatile inspection angles
- 5 mm diameter probe reaches confined spaces
- 3 m shaft length extends reach into deep cavities
- 1280 x 720 camera resolution captures clear detail
- 75 degree field of view covers wide area
Compatible Inspection Probe
This 8.5 mm diameter probe works with Fluke DS701 and DS703 videoscope units. It provides a 3 metre shaft length for reaching deep cavities in industrial maintenance and quality control tasks. The forward and side view capability allows flexible visual checks without repositioning the base unit.
Build and Daily Handling
A 0.33 in shaft diameter balances rigidity for push-through strength with flexibility for tight bends. The package includes a carrying case to protect the optical tip and cable during transport between job sites. Forward and side view optics are integrated into the tip, so no extra adapters are needed on site.
Optical and Focus Limits
The camera delivers 1280 x 720 pixel resolution across a 75 degree field of view. Sharp focus is maintained between 1.39 in and 4.4 in from the target, so very close or distant defects may appear soft. Users must position the probe within this narrow window for clear defect recognition.
Highlights
- Forward and side view for versatile inspection angles
- 5 mm diameter probe reaches confined spaces
- 3 m shaft length extends reach into deep cavities
- 1280 x 720 camera resolution captures clear detail
- 75 degree field of view covers wide area
Specifications
| Brand | Fluke |
|---|
Questions about this item
What DS701 and DS703 models does the 8.5 mm borescope probe work with?
The probe is compatible with Fluke DS701, DS703 and the DS703 FC series videoscopes.
What are the shaft length and diameter so I can check access clearances?
The shaft is 9 13/16 ft long and 0.33 in (8.5 mm) in diameter.
How do I attach the probe to the DS701 or DS703 and what step is often missed?
Align the connector keyway, push until it clicks, then tighten the locking collar; the collar is often left loose.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
