Fluke
Fluke 871207/1A 1A 600V 10kA Glass Fuse 5 Pack
Five fast-acting 1 A, 600 V AC glass fuses rated 10 kA interrupt for multimeter protection
- Protects multimeters with 10 kA interrupt rating at 600 V AC
- Fast-acting BBS design clears faults quickly to safeguard equipment
- Five fuses per pack keep spares on hand for field replacements
- UL Listed, CSA Certified and CE marked for recognised safety compliance
- Cylindrical fiber body 1 3/8 in long by 13/32 in diameter fits standard holders
Fluke 1 A 600 V glass fuse pack
This pack contains five Fluke BBS-series glass fuses rated at 1 ampere and 600 volts AC. They are designed as direct replacements for the internal protection circuits of Fluke digital multimeters and similar test equipment. The fast-acting element interrupts fault currents up to 10 kA, protecting the meter from damage during accidental overloads. Technicians and engineers who service or calibrate electrical instrumentation will find these fuses essential for maintaining safety compliance.
Drop-in cylindrical body installs in seconds
Each fuse measures 1-3/8 inches long by 13/32 inches in diameter, matching the standard cylindrical fuse holder found in most handheld multimeters. Installation requires only opening the meter's fuse compartment, removing the blown element, and inserting the new fuse with the correct orientation. The fiber body and single-element construction leave no ambiguity about polarity. The most common error is fitting a lower-voltage or lower-interrupting-rated fuse, which can fail explosively under fault conditions.
Five fuses cover multiple meter recalibrations
A single pack supplies enough spares for several service calls or a complete bench recalibration of multiple instruments. The 1 A rating suits the milliamp and microamp input circuits of typical Fluke meters, while the 10 kA interrupt rating at 600 V AC provides ample headroom for industrial power measurements. The fuses are not suitable for circuits requiring higher current ratings or for DC interrupting duties beyond the listed AC specification. Builders needing different amperage values must source the appropriate BBS-series variant separately.
Highlights
- Protects multimeters with 10 kA interrupt rating at 600 V AC
- Fast-acting BBS design clears faults quickly to safeguard equipment
- Five fuses per pack keep spares on hand for field replacements
- UL Listed, CSA Certified and CE marked for recognised safety compliance
- Cylindrical fiber body 1 3/8 in long by 13/32 in diameter fits standard holders
Specifications
| Brand | FLUKE |
|---|
Questions about this item
How can I verify the 1A 600V AC fuse is working after installation?
Use a multimeter in continuity or resistance mode; a good fuse shows near-zero ohms while a blown one reads open circuit.
What comes in the 5-pack and is any extra hardware required?
The pack contains five 1A 600V AC cylindrical glass fuses measuring 1-3/8 in long by 13/32 in diameter; no additional hardware is needed for direct replacement.
Which fuse rating should I choose for a Fluke meter that specifies a 1A 600V AC 10kA interrupt fuse?
Select this 1A 600V AC 10kA BBS-series fuse; it matches the required current, voltage and interrupt rating for that meter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
