We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fluke 810S vibration sensor ceramic stainless steel body

Fluke

Fluke 810S VibeSensor Ceramic Stainless Steel measurement tool

SKU CH-063N-J13G8

PZT ceramic and stainless-steel vibration sensor covering 2 Hz to 7 kHz with an 80 g acceleration range for Fluke 810 testers

  • TypeDigital Multimeters
  • Measures vibration up to 80 g for detailed machinery analysis
  • PZT ceramic and stainless steel construction withstands harsh industrial environments
  • Frequency response reaches 7,000 Hz on Z axis for high-speed fault detection
  • Low-frequency sensitivity down to 2 Hz captures slow-speed imbalance
  • Designed specifically for Fluke 810 vibration tester compatibility

Fluke 810S VibeSensor Ceramic Stainless Steel

The Fluke 810S VibeSensor is a vibration sensor designed for use with the Fluke 810 vibration tester. It targets maintenance technicians and reliability engineers who need to capture machinery vibration data for diagnostic analysis. The sensor connects to the tester to measure acceleration across three axes during routine condition monitoring or troubleshooting tasks.

Acceleration range 0 to 80 g

The single specification that determines suitability is the acceleration measurement range of 0 g minimum to 80 g maximum. This range defines the vibration amplitudes the sensor can accurately detect on the X, Y and Z axes. If the equipment under test generates vibration levels outside this window, the sensor will not provide valid data for the Fluke 810 analyser.

Includes Warning Sheet only

The bundled accessory is a Warning Sheet that provides safety and installation guidance for the sensor. No mounting hardware, cables, calibration certificates or software licences are supplied with this item. Users must source appropriate mounting studs or adhesives separately and ensure they have the compatible Fluke 810 tester to read the sensor output.

Highlights

  • Measures vibration up to 80 g for detailed machinery analysis
  • PZT ceramic and stainless steel construction withstands harsh industrial environments
  • Frequency response reaches 7,000 Hz on Z axis for high-speed fault detection
  • Low-frequency sensitivity down to 2 Hz captures slow-speed imbalance
  • Designed specifically for Fluke 810 vibration tester compatibility

Specifications

BrandFLUKE
TypeDigital Multimeters

Questions about this item

What does the 80 g maximum acceleration mean for real-world vibration monitoring?

The sensor can measure shocks and continuous vibration up to 80 g, so it captures both routine machine vibration and sudden impact events without saturating.

How does the 5,000 Hz frequency ceiling on the X and Y axes affect the data I collect?

Vibration components above 5,000 Hz on those axes are attenuated, so the sensor reliably reports content within the stated bandwidth but rolls off beyond it.

What mounting considerations come from the PZT ceramic and stainless-steel construction?

The ceramic sensing element and stainless-steel housing are rigid and corrosion-resistant, so the sensor can be stud-mounted or magnetically attached to clean, flat metal surfaces without special isolation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.