Fluke
Fluke 376FC AC/DC Clamp Meter with iFlex measurement
Measures AC/DC current up to 1000 A with included 18-inch or 36-inch iFlex probe and logs data wirelessly to a smartphone for remote monitoring
- TypeTest Connectors
- Measures AC/DC current using included 18-inch or 36-inch iFlex probe
- Remotely log and monitor measurements via smartphone with Fluke Connect app
- Read measurements on phone at safe distance while wearing less PPE
- Capture intermittent faults using logging capabilities while performing other tasks
- 1000A AC/DC TRMS wireless clamp meter weighs 395 grams
Industrial clamp meter with iFlex
The Fluke 376FC is a true-RMS clamp meter designed for industrial and commercial electricians. It measures AC and DC current up to 1000 A using the included 18-inch or 36-inch iFlex flexible current probe. Bluetooth connectivity links the meter to a smartphone running the Fluke Connect app for remote viewing and data logging.
Logging range limited by probe length
The iFlex probe provides access to large conductors and tight cable bundles where a standard jaw cannot reach, but its 18-inch or 36-inch length sets the practical limit for conductor size. Low-pass filtering removes variable-frequency drive noise for accurate motor-drive readings, while inrush capture records motor-start transients. Remote logging distance depends on the Bluetooth link budget in the specific electrical environment.
Clamp-on install with wireless setup
Installation is a simple clamp-on action around the conductor; no circuit interruption is required. The flexible probe routes around obstacles, though very large busbars may exceed the maximum loop diameter. Pairing with the Fluke Connect app requires a compatible smartphone and the free app download. The 395-gram body runs on alkaline cells, so battery changes are the only routine maintenance.
Highlights
- Measures AC/DC current using included 18-inch or 36-inch iFlex probe
- Remotely log and monitor measurements via smartphone with Fluke Connect app
- Read measurements on phone at safe distance while wearing less PPE
- Capture intermittent faults using logging capabilities while performing other tasks
- 1000A AC/DC TRMS wireless clamp meter weighs 395 grams
Specifications
| Type | Test Connectors |
|---|
Questions about this item
Which iFlex probe length should I choose, 18-inch or 36-inch?
The 18-inch probe suits tight panels and motor leads, while the 36-inch probe reaches bus-bars and large conductors; both are included with the 376 FC clamp meter.
What does the 1000A rating mean when I am measuring a variable-frequency drive?
The meter reads true-RMS AC/DC current up to 1000 A, and the built-in low-pass filter removes VFD switching noise so the displayed value reflects the fundamental motor current.
How does the Bluetooth link limit what I can log remotely?
The Fluke Connect app pairs with the 376 FC to stream readings to a smartphone, letting you log trends and capture inrush events from a safe distance while the clamp stays on the conductor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
