We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium headshell with H-4 bayonet mount and finger lift

Fluance

Fluance PFHTS1 Turntable Headshell H-4 Bayonet Mount 10g Aluminium

SKU CH-Z11H-WCECR

Aluminium headshell with H-4 bayonet mount and slotted 1/2-inch cartridge adjustment

  • TypeTurntable
  • Weight.02 lbs
  • Lightweight 10g aluminium reduces tonearm mass
  • H-4 bayonet mount fits Fluance RT80, RT81, RT81+ turntables
  • Slotted design enables precise 1/2-inch cartridge alignment
  • Colour-coded lead wires simplify 4-pin cartridge wiring
  • Integrated finger lift eases tonearm handling

Fluance PFHTS1 Aluminium Headshell

The Fluance PFHTS1 is a 10g aluminium headshell built for Fluance RT80, RT81 and RT81+ turntables. It uses an industry-standard H-4 bayonet mount with a rubber washer to secure the connection to the tonearm. Colour-coded lead wires simplify the installation of any 4-pin cartridge using 1/2 inch mounting. An integrated finger lift allows for simple tonearm operation.

Upgrade From Fixed or Damaged Headshell

This headshell replaces a fixed or damaged unit, adding slotted mounts that allow precise cartridge alignment and overhang adjustment. The jump is worth it when the original headshell lacks adjustable slots or when the bayonet connection has worn loose. The lightweight aluminium construction maintains low effective mass for accurate tracking. It is not for tonearms that require a different mounting standard or proprietary connector.

Build Integration and Compatibility

The H-4 bayonet mount fits directly onto compatible Fluance tonearms without adapters. Colour-coded wires connect to the cartridge pins, freeing the installer from guesswork during wiring. Slotted mounting holes provide the range needed to set overhang and alignment correctly. The 10g mass suits cartridges designed for light to medium effective mass arms. Buyers needing a heavier shell or a different mount type should look elsewhere.

Highlights

  • Lightweight 10g aluminium reduces tonearm mass
  • H-4 bayonet mount fits Fluance RT80, RT81, RT81+ turntables
  • Slotted design enables precise 1/2-inch cartridge alignment
  • Colour-coded lead wires simplify 4-pin cartridge wiring
  • Integrated finger lift eases tonearm handling

Specifications

BrandFluance
ModelPFHTS1
Part NumberPFHTS1
TypeTurntable
Weight.02 lbs

Questions about this item

Will the 10 g aluminium headshell fit the H-4 bayonet mount on my Fluance RT80 or RT81 turntable?

Yes — the headshell is built for the industry-standard H-4 bayonet mount used on the RT80, RT81 and RT81+ models, so it locks directly onto the tonearm without adapters.

Which step do people miss when wiring the colour-coded leads to a 4-pin cartridge?

Match each colour to the correct cartridge pin before tightening the ½-inch mounting screws; reversing the channels is the most common error.

When should I replace the rubber washer that sits between the headshell and the tonearm?

Replace it if you notice looseness, audible microphonic noise, or visible cracking — typically after several years of regular use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.