We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gold-plated RCA cable with dual-spade ground wire, 3 ft

Fluance

Fluance PFHTCA Gold-Plated RCA Cable with Ground Wire, 3 ft

SKU CH-FM2Q-J4WN0

A 3 ft gold-plated RCA cable with dual-spade ground wire for clean turntable-to-preamp signal transfer

  • TypeTurntable
  • Weightlbs
  • Gold-plated connectors maintain signal fidelity
  • Dual-spade ground wire secures connection to external preamp
  • Three-foot length suits typical turntable-to-speaker runs
  • Lifetime customer support backs the cable
  • One-year manufacturer warranty covers defects

Turntable RCA Cable with Ground Wire

This 3 ft Fluance PFHTCA cable connects a turntable to an external preamp or powered speakers using gold-plated RCA connectors. A dual-spade ground wire is integrated to eliminate hum and keep the audio signal clean. It is built for vinyl enthusiasts who need a reliable analog link between deck and amplification.

Low-Capacitance Analog Link

Gold plating on the RCA plugs resists oxidation and maintains consistent contact resistance over time. The dedicated ground wire with dual spade terminals provides a secure chassis bond, preventing ground-loop noise without adding active circuitry. As a passive cable, it draws no power and generates no heat or audible noise of its own.

Simple Stereo Integration

The 3 ft length suits close-proximity setups such as a turntable placed beside a phono stage or integrated amplifier. Dual spade lugs fit standard grounding posts on most external preamps, while the RCA pair carries left and right channels in a single run. Buyers needing longer runs or balanced XLR connections will require a different cable.

Highlights

  • Gold-plated connectors maintain signal fidelity
  • Dual-spade ground wire secures connection to external preamp
  • Three-foot length suits typical turntable-to-speaker runs
  • Lifetime customer support backs the cable
  • One-year manufacturer warranty covers defects

Specifications

BrandFluance
ModelPFHTCA
Part NumberPFHTCA
TypeTurntable
Weightlbs

Questions about this item

How do I connect the gold-plated RCA plugs and the dual-spade ground wire to my turntable and external preamp?

Plug each RCA connector into the matching left and right phono inputs on the preamp, then loosen the preamp's grounding post, slide both spade lugs onto the post and retighten to secure the ground path.

Will the gold-plated connectors or the spade lugs need periodic cleaning or replacement?

Gold plating resists oxidation, so the RCA pins rarely need attention; if the spade lugs loosen over time, simply retighten the grounding post rather than replacing the cable.

At what cable length does signal loss become noticeable with this 3-foot design?

The 3-foot length keeps capacitance low enough that audible high-frequency roll-off does not appear in typical home-audio runs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.