Fluance GW03 Dual Spade Ground Wire 3 ft

Ground wire for turntables

The Fluance GW03 is a three‑foot dual‑spade ground wire built to connect a turntable to an amplifier or phono stage. It provides a direct path for chassis potential so that stray electrical charge cannot build up and cause audible hum. The cable fits any standard ground terminal and works with virtually every turntable that uses a spade connection. Proper grounding keeps the signal clean and the listening experience free from low‑frequency buzz.

Who benefits and who should look elsewhere

Owners of turntables with a ground post who hear ground‑loop hum will benefit immediately from this wire. Systems that already have a solid chassis ground or that use balanced connections with no external ground terminal will not need it. Buyers who require a longer run or a different connector type such as a banana plug or RCA ground should look for an alternative cable. The three‑foot length suits most desktop and rack setups but cannot reach distant equipment racks.

Build integration

The wire simply attaches between the turntable’s ground lug and the amplifier’s ground terminal using the two spade ends. No tools, soldering or additional adapters are required for standard terminals. By eliminating ground‑loop noise it frees the phono stage to deliver its full dynamic range without a noise floor raised by hum. The short, flexible cable routes easily behind components and adds no measurable capacitance to the signal path.