We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey metal booster pump with motor housing and pipe connections

Flotec

Flotec FP5732 Booster Pump 1HP 10GPM 115/230V

SKU CH-YXBA-53RV4

Single-phase booster pump delivers 10 GPM at 1 HP with 115/230V dual-voltage operation

  • Delivers strong water pressure with 1 hp motor
  • Handles dual-voltage sites using 115/230V AC supply
  • Moves up to 10 gallons per minute at peak flow
  • Connects easily via 3/4 in intake and discharge ports
  • Ready for horizontal mounting in tight equipment rooms

Flotec FP5732 1 HP Booster Pump

The Flotec FP5732 is a single-phase booster pump rated at 1 horsepower for residential and light commercial water pressure boosting. It operates on 115/230V AC power and connects to 3/4 inch intake and discharge piping.

Suits homes needing higher pressure.

This pump suits homeowners who need stronger pressure at fixtures and appliances fed by a 3/4 inch supply line. It is not for installations that require flow rates above 10 GPM or systems that demand larger pipe connections.

10 GPM rated flow at 1 HP

The key specification is the 10 GPM flow capacity delivered by the 1 HP motor on a single-phase supply. This figure determines whether the pump can meet the simultaneous demand of the intended outlets.

Highlights

  • Delivers strong water pressure with 1 hp motor
  • Handles dual-voltage sites using 115/230V AC supply
  • Moves up to 10 gallons per minute at peak flow
  • Connects easily via 3/4 in intake and discharge ports
  • Ready for horizontal mounting in tight equipment rooms

Specifications

BrandFLOTEC

Questions about this item

How can I verify the Flotec FP5732 booster pump is operating correctly after installation?

Check that the pump delivers steady water flow at the 10 GPM rating and that the motor runs quietly on the selected 115V or 230V supply without tripping the breaker.

What components come with the FP5732 pump and what must I supply separately?

The pump includes the motor and housing with 3/4-inch intake and discharge ports; you must provide the 115/230V power wiring, mounting hardware for horizontal installation, and compatible 3/4-inch piping.

Which voltage setting should I choose for the 1HP Flotec FP5732?

Select 115V if your circuit provides 115V AC, or 230V if it provides 230V AC; the motor is dual-voltage and must be wired to match the supply you have.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.