FloJet
FloJet G573215Z Double Diaphragm Pump 5 gpm
Air-operated double diaphragm pump with Viton diaphragms and FKM check seats, delivering up to 5 gpm through 1/2-inch barbed ports
- TypeDrain Components
- Delivers up to 5 gpm flow rate for efficient fluid transfer
- Air-operated double diaphragm design handles varied media without electrical power
- Viton diaphragms and FKM check seats resist aggressive chemicals
- 1/2-inch barbed ports on both intake and discharge simplify hose connections
- Bottom-mounted ports allow compact installation in tight spaces
Air-operated diaphragm pump
The FloJet G573215Z is a double diaphragm pump driven by compressed air. Its polypropylene body and Viton diaphragms resist a wide range of chemicals. Maximum flow reaches 5 gpm through half-inch barbed ports. The unit suits fluid transfer tasks where electric power is unavailable or unsafe.
Chemical transfer and fluid handling
This pump serves operators moving aggressive liquids, solvents or acids in industrial and marine settings. Air drive eliminates spark risk in hazardous areas. Buyers who need metered dosing, high-pressure delivery or electric motor operation should look at alternative pump types.
5 gpm maximum flow rate
The 5 gpm peak flow determines whether the pump can meet your required transfer speed. Check your system demand against this figure before purchase. If your application needs higher volume, a larger pump will be necessary.
Highlights
- Delivers up to 5 gpm flow rate for efficient fluid transfer
- Air-operated double diaphragm design handles varied media without electrical power
- Viton diaphragms and FKM check seats resist aggressive chemicals
- 1/2-inch barbed ports on both intake and discharge simplify hose connections
- Bottom-mounted ports allow compact installation in tight spaces
Specifications
| Type | Drain Components |
|---|---|
| Brand | Flojet |
| Model | G573215Z |
Questions about this item
What does the 5 gpm maximum flow rate mean when the pump is installed in a system?
The pump can move up to five gallons per minute of fluid under optimal air pressure and unrestricted piping; actual flow will be lower if hoses, fittings or head pressure add resistance.
How does the 1/4 inch barbed air intake connection limit the air supply I can use?
The barbed fitting accepts 1/4 inch inside-diameter tubing, so the air line and regulator must match that size; a larger supply hose will need a reducer to fit securely.
What mounting considerations come from the bottom intake and discharge ports on this pump?
Both fluid ports face downward, so the pump must be positioned with clearance beneath it for 1/2 inch barbed hoses and fittings, and the mounting surface should support the pump body above those connections.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



