Flint & Walling
Flint & Walling PB1014A101 Booster Pump 1 hp 115/230V 3/4 in NPT
Delivers up to 15.5 gpm at 20 psi with a 1 hp motor on 115/230V and 3/4 in NPT connections
- TypeDrain Components
- 1 hp motor delivers strong pressure up to 183 psi
- Flow rate 15.5 gpm at 20 psi for high volume
- Cast iron housing resists corrosion and wear
- Single-phase 115/230V AC works with standard wiring
- 3/4 in NPT intake fits common plumbing connections
Booster pump for pressure systems
The Flint & Walling PB1014A101 is a single-phase booster pump rated at 1 hp with a 115/230 V AC motor. It delivers up to 15.5 gpm at 20 psi and maintains 9.8 gpm at 120 psi for residential or light-commercial water-pressure boosting.
Check voltage and pipe size before ordering
Verify that the supply circuit matches the 115/230 V AC nameplate rating and that the plumbing uses a 3/4 in NPT intake connection. The open dripproof motor enclosure requires a dry, ventilated location away from direct spray or flooding.
Cast-iron housing fits inline installations
The cast-iron pump housing connects directly into existing 3/4 in NPT piping without adapters. The 1 hp motor provides a shut-off pressure of 183 psi, freeing the system from low-flow conditions at fixtures and appliances throughout the building.
Highlights
- 1 hp motor delivers strong pressure up to 183 psi
- Flow rate 15.5 gpm at 20 psi for high volume
- Cast iron housing resists corrosion and wear
- Single-phase 115/230V AC works with standard wiring
- 3/4 in NPT intake fits common plumbing connections
Specifications
| Type | Drain Components |
|---|---|
| Brand | Flint & Walling |
| Model | PB1014A101 |
Questions about this item
What comes with the PB1014A101 booster pump and what extra parts are needed for installation?
The pump has a 3/4 in NPT intake and a cast-iron housing; compatible pipe and fittings must be supplied separately.
How do I choose between the 115 V and 230 V wiring for this 1 hp motor?
The nameplate shows 115/230 V AC single-phase; select the voltage that matches your supply and wire the motor accordingly.
What does the 15.5 gpm @ 20 psi rating mean for everyday water pressure?
At a typical 20 psi demand the pump delivers 15.5 gpm, falling to 11.2 gpm at 100 psi and shutting off at 183 psi maximum.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
