Flex A Bit
Flex A Bit Flexible Extension 1/4 in Hex Shank 11 in
A flexible extension with a magnetic 1/4-inch hex shank reaches 11 inches for awkward fastening jobs
- TypeTarps
- Magnetic bit holder keeps fasteners secure during use
- 11 in overall length reaches confined spaces easily
- Flexible steel shaft bends around obstacles without binding
- 1/4 in hex shank fits standard drill chucks directly
- Single-piece construction requires no assembly before work
Flexible Extension with 11 in Reach
The Flex A Bit flexible extension adds 11 inches of reach to 1/4 inch hex shank bits. Its steel body and magnetic retainer hold bits securely during fastening tasks. The tool is rated for non-impact power tool applications only.
Steady Control in Confined Spaces
Under sustained use the shaft bends to follow awkward angles without transferring excessive vibration to the bit. The magnetic holder keeps the bit seated through repeated cycles. The non-impact rating means it is designed for controlled driving rather than high-torque hammering.
Check Drive Size and Impact Needs
Verify that your power tool accepts a 1/4 inch hex shank before ordering. Confirm the work does not require an impact-rated extension, as this model is not rated for impact use. The single-piece pack contains one extension only.
Highlights
- Magnetic bit holder keeps fasteners secure during use
- 11 in overall length reaches confined spaces easily
- Flexible steel shaft bends around obstacles without binding
- 1/4 in hex shank fits standard drill chucks directly
- Single-piece construction requires no assembly before work
Specifications
| Brand | Flex A Bit |
|---|---|
| Type | Tarps |
Questions about this item
How much heat does the 11 in steel extension generate during extended drilling?
The steel extension itself produces no heat; any warmth comes from the drill motor and friction at the bit, not from the shaft.
What drive tool must I already own to use the 1/4 in hex shank?
A drill, impact driver or bit holder with a 1/4 in hex chuck is required to accept the shank.
Will the magnetic bit retainer hold standard 1/4 in hex bits from my older sets?
Yes, the magnetic retainer accepts any 1/4 in hex insert bit regardless of brand or age.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
