We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flashpoint XPLOR 600 HSS TTL monolight and R2 Mark II wireless trigger for Fuji

Flashpoint Brand

Flashpoint XPLOR 600 HSS TTL R2 Mark II Wireless Flash Trigger for Fuji studio

SKU CH-Z1C1-DTDQ4

A 600ws battery-powered monolight with built-in 2.4 GHz radio and a Fuji-compatible TTL trigger delivers over 450 full-power flashes per 11.1 V 8700 mAh charge

  • 600 Ws output powers studio-grade lighting anywhere
  • 4 GHz wireless trigger enables remote TTL control
  • High-speed sync allows wider apertures in bright light
  • 1 V 8700 mAh battery delivers over 450 full-power flashes
  • Bowens mount accepts a wide range of modifiers

600 Ws portable monolight

The Flashpoint XPLOR 600 HSS TTL is a battery-powered monolight that delivers 600 Ws of flash output in a self-contained unit. It uses an 11.1-volt 8700 mAh lithium-ion battery so it operates without mains power or generators. The Bowens mount accepts a wide range of light modifiers for studio or location work.

Consistent output over long sessions

The high-capacity battery provides over 450 full-power flashes on a single charge, letting you shoot extended outdoor or remote sessions without performance drop-off. High-Speed Sync supports faster shutter speeds and wider apertures for balanced daylight fill. Built-in TTL metering maintains accurate exposure across changing conditions.

Silent flash operation

The monolight produces no fan noise during flash recycling, keeping the set quiet for video or sensitive subjects. Power is drawn solely from the internal lithium-ion pack, eliminating cable trip hazards and the need for external power distribution. The 2.4 GHz radio system maintains reliable wireless triggering without adding audible components.

Highlights

  • 600 Ws output powers studio-grade lighting anywhere
  • 4 GHz wireless trigger enables remote TTL control
  • High-speed sync allows wider apertures in bright light
  • 1 V 8700 mAh battery delivers over 450 full-power flashes
  • Bowens mount accepts a wide range of modifiers

Specifications

No published specifications for this item yet.

Questions about this item

How loud does the XPLOR 600 monolight get and how much heat does it produce during all-day shooting?

The 600ws monolight runs on an 11.1-volt 8700mAh lithium-ion battery that delivers over 450 full-power bursts per charge, so heat and fan noise stay low enough for extended location work without mains power.

What camera body and mount does the R2 Mark II trigger require to work with this monolight?

The trigger is dedicated to Fuji cameras and communicates over the built-in 2.4 GHz radio system, so you need a compatible Fuji body with a hot shoe to control the XPLOR 600 wirelessly.

Will the 2.4 GHz radio in the R2 Mark II trigger still fire older manual flashes I already own?

The trigger controls the XPLOR 600 via its integrated 2.4 GHz receiver; legacy manual units without that same radio protocol will not be triggered by this specific transmitter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.