We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-plated steel wall plate with 5/8" locking receiver and VESA mount

Flashpoint Brand

Flashpoint T-Slot Wall Plate 5/8" Locking Receiver VESA Mount

SKU CH-4ZMT-E8CZR

Chrome-plated steel wall plate with 5/8″ locking receiver and 75 mm VESA mount supports 110 lbs (50 kg) for studio gear

  • Supports up to 110 lb of studio gear with chrome-plated steel construction
  • Stable 3.1 x 5.9" base minimises vibration for precise positioning
  • 5/8" locking receiver and 75 mm VESA mount fit wide equipment range
  • Machined 45° guide notches ensure accurate angled mounting
  • Multiple screw holes allow secure fixing to wood, apple boxes or beams

Chrome-plated steel wall plate

The Flashpoint T-Slot Wall Plate is a chrome-plated steel mounting platform built for studio and lighting rigs. It combines a 5/8-inch locking receiver with a 75 mm VESA pattern and multiple scattered screw holes for surface attachment. The base measures 3.1 by 5.9 inches and is rated to hold equipment up to 110 pounds.

Suited for fixed studio mounting

This plate suits photographers and videographers who need a permanent or semi-permanent anchor for lights, cameras or grip gear on walls, apple boxes or wooden beams. Machined guide notches allow precise 45-degree orientation when required. It is not for users who need a quick-release clamp, a lighter aluminium bracket or a different VESA spacing.

110 lb weight capacity

The single specification that decides fit is the 110-pound (50 kg) load rating. Any rig heavier than this limit requires a stronger mount, while lighter kits can use this plate with a wide safety margin.

Highlights

  • Supports up to 110 lb of studio gear with chrome-plated steel construction
  • Stable 3.1 x 5.9" base minimises vibration for precise positioning
  • 5/8" locking receiver and 75 mm VESA mount fit wide equipment range
  • Machined 45° guide notches ensure accurate angled mounting
  • Multiple screw holes allow secure fixing to wood, apple boxes or beams

Specifications

No published specifications for this item yet.

Questions about this item

Does the chrome-plated steel plate generate any noise or heat during extended studio use?

The wall plate is a passive chrome-plated steel mount with no moving parts or electronics, so it produces no noise or heat regardless of how long it remains installed.

What existing mounting hardware must I already have to attach this plate to a wall or beam?

You will need suitable screws or bolts for the scattered mounting holes on the 3.1 x 5.9" base, plus a 5/8" stud or a 75 mm VESA-compatible bracket to lock into the receiver.

Can the 5/8" locking receiver hold older lighting fixtures that use a standard baby pin?

Yes, the 5/8" locking receiver accepts standard 5/8" baby pins, so legacy lights and grip equipment with that spigot size will mount securely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.