We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-plated steel T-slot wall plate with 3-inch baby swivel pin and VESA 75mm mount

Flashpoint Brand

Flashpoint T-Slot Wall Plate 3" Baby Swivel Pin VESA 75mm

SKU CH-MAGV-7N7GH

A chrome-plated steel wall plate with a 3-inch baby swivel pin and VESA 75mm mount supports equipment up to 110lbs

  • Secure mounting with chrome-plated steel construction
  • Supports heavy equipment up to 110lbs (50kg)
  • Standard 5/8" stud fits common lighting gear
  • Quick wall attachment saves setup time
  • VESA 75mm and T-Slot dual compatibility

Chrome-plated steel wall plate

The Flashpoint T-Slot Wall Plate is a chrome-plated steel mounting plate designed for studio and lighting equipment. It integrates a 3-inch baby swivel pin and a VESA 75mm mounting pattern. The plate supports loads up to 110lbs (50kg) and includes machined guide notches for accurate 45-degree alignment. It is built for permanent or semi-permanent installation on walls, apple boxes or wooden beams.

Studios needing fixed overhead mounts

This plate suits photographers and videographers who need a secure, stationary anchor for cameras, microphones or lighting fixtures above a set. The combined VESA 75mm and 5/8-inch stud interface covers most monitors and grip gear. Builders who require a quick-release clamp, a longer extension arm or a lighter aluminium bracket should look at other mounting solutions.

3-inch baby swivel pin and VESA 75mm

The 3-inch baby swivel pin adds a 5/8-inch stud that accepts standard grip heads, boom arms and light fixtures directly. The VESA 75mm pattern allows direct attachment of compatible monitors, small cameras or VESA adapter plates without extra hardware. Machined 45-degree guide notches simplify precise angled mounting on beams or apple boxes.

Highlights

  • Secure mounting with chrome-plated steel construction
  • Supports heavy equipment up to 110lbs (50kg)
  • Standard 5/8" stud fits common lighting gear
  • Quick wall attachment saves setup time
  • VESA 75mm and T-Slot dual compatibility

Specifications

No published specifications for this item yet.

Questions about this item

What type of mounting surface or hardware do I need to attach the Flashpoint T-Slot Wall Plate?

The wall plate includes numerous screw holes for direct mounting to wood beams, apple boxes, walls or any rigid surface that accepts wood or machine screws.

Can I use the 5/8" baby swivel pin with my existing lighting fixtures that have a standard baby receiver?

Yes, the 3" chrome-plated 5/8" baby pin fits any standard baby receiver found on lights, grip heads or boom arms, letting you keep your current fixtures.

How do I verify the VESA 75mm mount is aligned correctly after installation?

Use the machined 45-degree guide notches on the plate edges to confirm square alignment, then check that the VESA pattern sits flush and the 50 kg load rating is not exceeded.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.