We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Flashpoint Brand

Flashpoint H2400P 2400ws Flash Head for XPLOR Power 2400

SKU CH-1BYH-A13B8

A 2400ws flash head for the XPLOR Power 2400 pack with 1/25,000s flash duration, 60W COB modeling light, and 12ft cable

  • 2400 ws output delivers intense illumination for professional shoots
  • Flash durations from 1/220 s to 1/25,000 s freeze fast motion with precision
  • 12 ft (3.7 m) kink-resistant cable allows flexible boom or softbox placement
  • 60 W COB LED modelling light offers proportional or manual brightness control
  • Two asymmetrical ports enable independent or linked power settings for balanced lighting

Flash head for XPLOR Power 2400

This 2400ws flash head is built for the XPLOR Power 2400 power pack and targets professional photographers who need high-output studio lighting. It delivers 2400ws of power through a dedicated asymmetrical port design that allows independent or linked output control. The 12ft (3.7m) kink-resistant cable supports flexible placement on booms or softboxes in any studio environment. A 60W COB LED modeling light provides continuous illumination with proportional or manual adjustment.

Flash duration range and cable reach

Flash durations span from a maximum of 1/25000s to a minimum of 1/220s, enabling sharp capture of fast motion or longer exposures as the scene demands. The 12ft cable length sets the practical working distance between the power pack and the head, which matters when positioning lights on tall stands or overhead rigs. The modeling light can also flash intermittently to signal that the pack has recycled and is ready for the next frame. No wireless or battery operation is described for this head.

Upgrading from lower-output heads

Photographers moving up from lower-wattage flash heads gain the ability to light larger sets, use heavier diffusion or work at smaller apertures without raising ISO. The jump is worth it when 2400ws is needed to overpower ambient light or to maintain consistent output across multiple heads on a single pack. Buyers who only need fill light or portable location power will find this head exceeds their requirements and ties them to the XPLOR Power 2400 system.

Highlights

  • 2400 ws output delivers intense illumination for professional shoots
  • Flash durations from 1/220 s to 1/25,000 s freeze fast motion with precision
  • 12 ft (3.7 m) kink-resistant cable allows flexible boom or softbox placement
  • 60 W COB LED modelling light offers proportional or manual brightness control
  • Two asymmetrical ports enable independent or linked power settings for balanced lighting

Specifications

No published specifications for this item yet.

Questions about this item

Should I use this head alone or add a second one for the XPLOR Power 2400 pack?

The pack has two asymmetrical ports that can run heads independently or linked; you can start with one head and add another later without changing the pack.

What does the 2400ws rating actually deliver when the head is fired?

It represents the total energy the XPLOR Power 2400 pack can dump into this head in a single flash, giving high output for large modifiers or distance work.

How does the 12 ft cable length affect where I can place the head?

The 3.7 m kink-resistant cable lets you boom the head overhead or reach across a studio without putting the heavy pack on a stand.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.