We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-plated steel lowboy stand with locking wheels and combo head, 3.8 ft max height

Flashpoint Brand

Flashpoint Brand 3.8 ft Lowboy Steel Stand Low Rolling Base Combo Head

SKU CH-380G-ZCMR9

Low-profile steel stand with locking wheels and combo head holds up to 44 lb from 2.6 to 3.8 ft

  • Exceptional stability from low centre of gravity and steel build
  • Supports up to 45 lbs of lighting gear
  • Height adjusts from 2.6 ft to 3.8 ft
  • Locking wheels enable easy repositioning without lowering load
  • Junior receiver and 90° swinging baby pin for vertical or horizontal mounting

Studio light stand with rolling base

The Flashpoint Lowboy is a chrome-plated steel stand built for studio or on-set lighting. It uses a three-section column with two risers and a low-profile rolling base to keep the centre of gravity near the floor. A 1-1/8" Junior receiver and a retractable 5/8" pin that swings 90 degrees let you mount fixtures vertically or horizontally. Locking wheels secure the stand once positioned.

Load capacity and working height

The stand supports 41.1 to 45 lbs of equipment, with the supplier highlighting a 44 lb figure for heavy fixtures. Maximum working height reaches 3.8 feet and minimum height is 2.6 feet, giving a usable range for overhead or low-angle lighting. The low base design adds stability when the column is fully extended, while the braking wheels allow repositioning without lowering the load.

Upgrade from fixed-base light stands

This stand replaces static light stands that must be lifted and carried for every position change. The rolling base with locking wheels eliminates that step, which is valuable when moving heavy heads or modifiers across a studio floor. Buyers who need greater maximum height or a smaller folded footprint for location kits will not find those attributes here.

Highlights

  • Exceptional stability from low centre of gravity and steel build
  • Supports up to 45 lbs of lighting gear
  • Height adjusts from 2.6 ft to 3.8 ft
  • Locking wheels enable easy repositioning without lowering load
  • Junior receiver and 90° swinging baby pin for vertical or horizontal mounting

Specifications

No published specifications for this item yet.

Questions about this item

Will this 3.8 ft stand with 44 lb capacity hold my older heavy strobe and modifier?

Yes, the load capacity ranges from 41.1 to 45 lbs, so it can support heavy strobes and large modifiers at its full 3.8 ft height or lower at 2.6 ft.

How do I verify the 90-degree swing pin and locking wheels are engaged correctly?

The 5/8" pin clicks at 90-degree intervals for vertical or horizontal mounting; press each wheel brake down until it locks firm and the stand no longer rolls.

Does the box include the rolling base, combo head and wheel brakes, or must I buy any of those separately?

The stand ships complete with the low rolling base, combo head with junior receiver and retractable pin, plus integrated braking wheels — no extra parts needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.