We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-finished steel C-stand with sliding leg, 2.5 inch grip head and 40 inch grip arm

Flashpoint Brand

Flashpoint 40" Quick Sliding Leg C-Stand Kit Chrome

SKU CH-AK4F-5C052

Chrome steel C-stand kit with sliding leg, 2.5" grip head, 40" arm, 19.1–25 lb capacity and 3.2–10.3' height range

  • Chrome steel build resists corrosion on set
  • Sliding Rocky Mountain leg levels on uneven ground
  • 5″ grip head plus 40″ arm enable precise positioning
  • Supports 19.1–25 lbs for heavy strobes and modifiers
  • Extends from 3.2′ to 10.3′ for versatile height control

Chrome C-Stand Kit with Sliding Leg

This 40-inch chrome-finished steel C-stand kit includes a 2.5-inch grip head and a 40-inch grip arm for studio lighting support. The stand reaches a maximum height of 10.3 feet and lowers to 3.2 feet with a 37.4-inch footprint. It handles loads between 19.1 and 25 lbs for strobes and large modifiers.

Quick-Release Sliding Leg for Uneven Ground

The Rocky Mountain sliding leg adjusts independently on the main riser so the base stays level on stairs or rough terrain. A quick-release mechanism speeds deployment without tools. Tighten all knobs firmly after positioning to prevent the leg from shifting under heavy loads.

Verify Ceiling Height and Floor Space Before Buying

Measure your studio ceiling against the 10.3-foot maximum extension to ensure full range. Confirm at least 37.4 inches of clear floor diameter for the footprint. Check that your modifiers and heads fall within the 19.1 to 25 lb capacity range.

Highlights

  • Chrome steel build resists corrosion on set
  • Sliding Rocky Mountain leg levels on uneven ground
  • 5″ grip head plus 40″ arm enable precise positioning
  • Supports 19.1–25 lbs for heavy strobes and modifiers
  • Extends from 3.2′ to 10.3′ for versatile height control

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the stand is stable once I set it up?

Extend the three sections to the desired height, lock each riser, and ensure the sliding Rocky Mountain leg rests firmly on the floor; the 37.4 inch footprint and 19.1 to 25 lb load rating keep the 5/8 inch stud steady.

What comes in the kit and what must I add?

The box contains the chrome steel C-stand with two risers and three sections, a 2.5 inch grip head and a 40 inch grip arm; sandbags or additional ballast are not included.

Which height range suits a typical studio ceiling?

The stand adjusts from a minimum of 3.2 ft (0.97 m) up to a maximum of 10.3 ft (3.13 m), so choose the extension that keeps your modifier clear of the ceiling while staying within the 19.1 to 25 lb capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.