We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular module with multiple coloured wiring harnesses and cables attached

FlashLogic

FlashLogic FLCAN Multi-Platform Canbus Doorlock Interface

SKU CH-NG53-5C832

A databus interface module that links a Code-Alarm security system to the vehicle CAN bus for transponder bypass, keyless entry, alarm control and status signals.

  • Communicates with vehicle databus for plug-in Code-Alarm integration
  • Enables passive anti-theft bypass for transponder, VATS, Passlock, PK3 systems
  • Controls factory keyless entry, alarm arm/disarm, door trigger status
  • Provides tach signal, dome light supervision, trunk/hatch open monitoring
  • Requires FLPROG cable and web-update programming for specific vehicle compatibility

Vehicle Integration

The FlashLogic FLCAN module connects a Code-Alarm security system to the factory databus on supported vehicles. It enables functions such as passive anti-theft bypass, keyless entry control, alarm arming and disarming, door trigger status, tach signal, dome light supervision and trunk or hatch monitoring.

Power And Signal

The unit draws minimal current from the vehicle electrical system during normal operation. No active cooling is required, so the installation remains silent and does not add measurable load to the battery or alternator.

Wiring And Mounting

Included harnesses measure 18, 19 and 24 inches with colour-coded connectors for the DBI port, standard wiring and auxiliary connections. The module must be flashed for the specific vehicle using the separate FLPROG cable before installation.

Highlights

  • Communicates with vehicle databus for plug-in Code-Alarm integration
  • Enables passive anti-theft bypass for transponder, VATS, Passlock, PK3 systems
  • Controls factory keyless entry, alarm arm/disarm, door trigger status
  • Provides tach signal, dome light supervision, trunk/hatch open monitoring
  • Requires FLPROG cable and web-update programming for specific vehicle compatibility

Specifications

BrandFLASHLOGIC

Questions about this item

How do I install the FlashLogic FLCAN interface and what step is commonly missed?

Connect the supplied 19", 24" and 18" harnesses to the vehicle and the Code-Alarm system, then flash the module for your specific vehicle using the FLPROG cable and web-update before use; the module is not pre-flashed.

What maintenance or replacement will the FLCAN interface need later?

The module itself has no scheduled maintenance; only the included wiring harnesses may need replacement if connectors or wires become damaged over time.

What limit appears first during sustained use of the FLCAN interface?

Continuous operation is limited by the vehicle's electrical system and the Code-Alarm controller; the FLCAN module has no internal duty-cycle restriction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.