We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coextruded orange green blue PLA filament spool with silk finish

FlashForge Silk Tri-Color PLA Filament 1.75mm Orange Green Blue 18g

SKU CH-HZJ8-28X1S

Tri-color silk PLA filament with a 360° shifting colour effect, 1.75 mm diameter and 18 g weight

  • ColorSilky Triple-color Orange & Green & Blue
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight0.018 kilograms
  • Tri-color silk finish shifts through 360° of colour
  • 75 mm diameter works with 99% of FDM printers
  • Vacuum-sealed after 24-hour drying prevents moisture defects
  • Automatic winding plus manual check keeps spool tangle-free
  • Premium PLA blend gives improved toughness and minimal shrinkage

Silk tri-color filament for visual prints

FlashForge Silk Tri-Color PLA Filament arrives as an 18 g sample coil in a coextruded orange, green and blue blend. The 1.75 mm diameter works with 99% of FDM printers and the silk finish creates a 360° multicolour shifting effect on every layer.

Dried and vacuum-sealed for reliable flow

Each spool is dried for 24 hours before packing and sealed with desiccant to prevent moisture uptake. Automatic winding plus manual inspection keeps the filament tangle-free, while the clog-resistant formulation reduces jams and supports consistent extrusion.

Suits test prints and colour experiments

The small 18 g weight makes this coil practical for calibration cubes, colour swatches or single small models. Makers who need longer runs or a single solid colour should look at larger spools instead.

Highlights

  • Tri-color silk finish shifts through 360° of colour
  • 75 mm diameter works with 99% of FDM printers
  • Vacuum-sealed after 24-hour drying prevents moisture defects
  • Automatic winding plus manual check keeps spool tangle-free
  • Premium PLA blend gives improved toughness and minimal shrinkage

Specifications

BrandFlashForge
ColorSilky Triple-color Orange & Green & Blue
MaterialPolylactic Acid
Diameter1.75
Weight0.018 kilograms

Questions about this item

How often will I need to dry or replace the 18 g spool to prevent moisture issues?

The filament is thoroughly dried for 24 hours and vacuum sealed with desiccant, so it arrives ready to print and stays dry until opened.

What diameter tolerance or clog risk limits continuous printing on my FDM machine?

Produced with clog-resistant methods and automatic winding plus manual detection to keep the line tangle-free, it feeds steadily through 99 percent of FDM printers.

Does the silk finish change nozzle temperature, fan noise or power draw during long prints?

The silk tri-color PLA prints at standard PLA settings with no warping, jamming or layer delamination, so thermal and acoustic behaviour matches ordinary PLA.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.