We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Spool of 1.75 mm Burnt Titanium PLA filament showing iridescent colour-shift finish

FlashForge Chameleon PLA Filament 1.75mm Burnt Titanium 2.2lbs

SKU CH-MT36-QGGXA

Colour-changing PLA filament with a 1.75 mm diameter and ±0.02 mm tolerance that shifts hue under different light while hiding layer lines

  • ColorBurnt Titanium
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight2.2 pounds
  • Color shifts with light and viewing angle for striking visual effects
  • Special pigments conceal layer lines for smoother-looking prints
  • Low warping and minimal odor suit indoor and detailed printing
  • Clog-free and bubble-free after 24-hour drying and vacuum sealing
  • Precise 1.75 mm diameter with ±0.02 mm tolerance for reliable extrusion

FlashForge Chameleon PLA Filament

This FlashForge Chameleon PLA filament shifts colour with changing light and viewing angle, giving prints a dynamic finish that masks layer lines. The 1.75 mm diameter spool weighs 2.2 lbs and suits makers who want eye-catching decorative parts without post-processing. It is not for buyers who need engineering-grade heat resistance or mechanical strength.

Thermals noise and power draw

PLA prints at low temperatures, so the hot-end runs cooler and the printer fans stay quieter than with higher-temperature materials. The filament is dried for 24 hours and vacuum-sealed, which reduces moisture-related extrusion noise and keeps power draw steady during long prints.

Build quality and daily handling

The spool arrives clog-free and bubble-free after factory quality checks, and the tight +/- 0.02 mm diameter tolerance supports consistent flow through standard 1.75 mm extruders. Minimal warping and low odor make it practical for indoor desktop printers, while the vacuum bag lets you store the remainder between sessions without extra drying.

Highlights

  • Color shifts with light and viewing angle for striking visual effects
  • Special pigments conceal layer lines for smoother-looking prints
  • Low warping and minimal odor suit indoor and detailed printing
  • Clog-free and bubble-free after 24-hour drying and vacuum sealing
  • Precise 1.75 mm diameter with ±0.02 mm tolerance for reliable extrusion

Specifications

BrandFlashForge
Model1.75
ColorBurnt Titanium
MaterialPolylactic Acid
Diameter1.75
Weight2.2 pounds

Questions about this item

How do I load the 1.75 mm filament without the drive gear slipping on the first layer?

Pre-heat the nozzle to the PLA range, cut the tip at a clean angle, and push the strand until you feel resistance; the +/- 0.02 mm tolerance keeps the diameter consistent so the extruder grips evenly from the start.

What upkeep does the spool need after it has been opened for a few weeks?

Store the vacuum-sealed coil in a dry box with desiccant; the material was dried for 24 hours before sealing, so resealing it after each session prevents moisture uptake that causes popping.

At what point does heat creep make the chameleon pigment streak during a long print?

The low-shrinkage PLA formulation resists warping, but if the heat-break fan fails or the hot-end exceeds the normal PLA window the colour-shift effect can become uneven across layers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.