flame unicorn
flame unicorn AC Adapter 19.5V 10.3A 200W 7.4mm 5.0mm US plug
A 200 W slim adapter delivering 19.5 V at 10.3 A with a 7.4 mm × 5.0 mm pin connector for HP Omni 27-1000 and EliteBook 8740p, 8770w workstations
- Battery TypeLithium-Ion
- Worldwide voltage support from 100-240V AC input
- 200W output powers demanding HP workstations reliably
- Slim 7.4mm x 5.0mm pin connector fits precisely
- US power cord included for immediate desktop use
- Compatible with HP Omni 27 and EliteBook 8740p/8770w series
Compatible HP Models
This 200 W AC adapter replaces the original power supply for HP Omni 27-1000 AIO and EliteBook 8740p, 8770W, E8740p and E8770W notebooks. It matches part numbers 693708-001, HSTNN-DA24, 677764-002, 677764-003, 677764-001, HSTNN-CA24, HSTNN-LA24 and A200A05DL. The unit is new and includes the power cord.
Connector and Input Check
Verify that your device uses a 7.4 mm by 5.0 mm barrel connector with a centre pin before ordering. The adapter accepts 100 to 240 V AC at 50 to 60 Hz, so it works on mains supplies worldwide with only a plug adapter if the US plug does not fit your socket.
Thermal and Power Behaviour
The adapter delivers 19.5 V at 10.3 A for a continuous 200 W output in a slim form factor. Under normal load it runs warm but stays within typical external power-supply temperature limits, and the fanless design keeps noise to a minimum.
Highlights
- Worldwide voltage support from 100-240V AC input
- 200W output powers demanding HP workstations reliably
- Slim 7.4mm x 5.0mm pin connector fits precisely
- US power cord included for immediate desktop use
- Compatible with HP Omni 27 and EliteBook 8740p/8770w series
Specifications
| Battery Type | Lithium-Ion |
|---|
Questions about this item
Does the package include both the adapter and the power cord, or must the cord be purchased separately?
The box contains 1 AC adapter and 1 US-plug power cord, so nothing extra is required.
My laptop uses a 19.5V 10.3A 200W slim tip with a 7.4 mm 5.0 mm pin connector — is this the correct unit?
Yes, the adapter delivers 19.5V at 10.3A for 200W through a 7.4 mm 5.0 mm pin connector that matches the listed HP part numbers.
Will this 200W adapter run an HP Omni 27-1000 AIO and an 8770W workstation without overheating?
It supplies the exact 19.5V 10.3A 200W those models expect, and the 100-240V 50-60Hz input handles mains worldwide.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



