We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Flame Engineering

Flame Engineering JET4 C Propane Torch Kit 1000000 BTU

SKU CH-FX7E-GGS54

Propane torch kit delivers 1,000,000 BTU output with adjustable jet flame for outdoor heating tasks

  • MaterialHAWA
  • TypeWelding Supplies
  • 1,000,000 BTU output delivers intense heat for heavy-duty welding
  • Propane fuel compatibility offers widely available and cost-effective operation
  • 100 lb cylinder compatibility enables extended run times on large jobs
  • Adjustable flame control provides precise heat management for varied tasks
  • External lighter ignition ensures reliable start-up in outdoor conditions

Outdoor torch kit for high-heat tasks

This propane-fuelled outdoor torch kit delivers a jet flame rated at 1,000,000 BTU per hour on both propane and MAP-Pro. It connects to a 100 lb cylinder through a 1/4 in male left-hand NPT inlet and uses an external lighter for ignition. The fixed tip provides an adjustable flame for a range of heating, melting and weed-control jobs.

Sustained output on large cylinders

With a 100 lb propane cylinder the kit can maintain its full 1,000,000 BTU/h rating for extended periods without the pressure drop seen on smaller tanks. The fixed tip and adjustable valve keep the flame stable during long runs such as asphalt repair, ice removal or large-scale weed burning. Output remains consistent as long as cylinder pressure stays adequate.

Heat, noise and fuel consumption

The torch produces an intense, focused jet flame that directs heat precisely onto the work surface. Operating noise is limited to the roar of high-velocity gas combustion, with no mechanical parts to add vibration. Fuel draw at maximum setting is high, so plan cylinder capacity around the expected duration of continuous use.

Highlights

  • 1,000,000 BTU output delivers intense heat for heavy-duty welding
  • Propane fuel compatibility offers widely available and cost-effective operation
  • 100 lb cylinder compatibility enables extended run times on large jobs
  • Adjustable flame control provides precise heat management for varied tasks
  • External lighter ignition ensures reliable start-up in outdoor conditions

Specifications

BrandFLAME ENGINEERING
MaterialHAWA
TypeWelding Supplies

Questions about this item

How much heat does the JET4 C produce when running on propane all day?

The torch delivers a heating capacity of 1,000,000 BtuH on propane, so sustained full-throttle output stays at that level as long as the cylinder feeds it.

What fuel cylinder and lighter must I already have to use this kit?

You need a 100 lb propane cylinder and an external lighter, because the torch has a fixed tip, left-hand 1/4 in male NPT inlet, and no built-in ignition.

Will the left-hand 1/4 in NPT inlet connect to the regulator and hose I already own?

Yes, if your existing regulator and hose end in a matching left-hand 1/4 in NPT female fitting; otherwise you will need an adapter to join them.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.