We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Finisar FTLX1471D3BCL SFP+ transceiver module with LC duplex port, matte metal finish

Finisar Corporation

Finisar Corporation FTLX1471D3BCLProduct 10 Gbps single-mode SFP transceiver

SKU CH-RPQZ-KQVVB MPN FTLX1471D3BCLProduct

A 10 Gbps single-mode SFP+ transceiver for 10 Gigabit Ethernet links up to 10 km over single-mode fiber with LC duplex connector

  • Device TypeTransceiver
  • Ports1 x LC Duplex 10GBase-X
  • Transfer Rate10 Gbps
  • 10 Gbps throughput for high-speed data links
  • Single-mode fibre reaches 10 km distances
  • LC duplex connector fits standard patch panels
  • Hot-pluggable SFP+ form factor enables live swaps
  • MSA compliant and RoHS-6 certified for broad interoperability

10 Gbps single-mode SFP transceiver

The Finisar FTLX1471D3BCLProduct is a hot-pluggable XFP transceiver built for 10-Gigabit Ethernet links over single-mode fibre. It connects through one LC duplex port and targets data-centre operators who need reliable 10 km reach without replacing existing switch line cards. The module complies with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW standards. It is RoHS-6 certified and MSA compliant for broad vendor interoperability.

Sustained 10 Gbps throughput over 10 km

The transceiver maintains line-rate 10 Gbps across the full 10 km single-mode link without the short-burst limitations seen in some lower-reach optics. MSA-compliant electrical and optical interfaces keep error rates stable during continuous data-centre traffic patterns. SFF-8431 and SFF-8432 adherence ensures consistent signal integrity over extended operating periods. IEEE 802.3ae 10GBASE-LR/LW compliance guarantees the link budget required for long-haul sustained loads.

Low thermal load in normal rack conditions

The hot-pluggable XFP form factor draws modest power typical for 10 km single-mode optics, keeping slot temperatures within standard switch chassis limits. RoHS-6 construction eliminates restricted substances without adding thermal insulation that could trap heat. MSA-compliant mechanical dimensions allow normal airflow through adjacent populated cages. No active cooling is required on the module itself under typical data-centre ambient conditions.

Highlights

  • 10 Gbps throughput for high-speed data links
  • Single-mode fibre reaches 10 km distances
  • LC duplex connector fits standard patch panels
  • Hot-pluggable SFP+ form factor enables live swaps
  • MSA compliant and RoHS-6 certified for broad interoperability

Specifications

BrandFinisar
Device TypeTransceiver
Ports1 x LC Duplex 10GBase-X
Transfer Rate10 Gbps

Questions about this item

How much power does the FTLX1471D3BCL draw when running a 10 Gbps link all day?

The transceiver is compliant with SFF-8431 and SFF-8432, which define the power envelope for SFP+ modules operating at 10 Gbps.

What patch cable and switch port are needed to use the LC duplex connector on this module?

You need a single-mode LC duplex patch cable and a switch or router port that accepts an SFP+ module running 10GBase-LR.

Will this hot-pluggable XFP work in an older chassis that only supports the original XFP MSA?

Yes, the module is Multi Source Agreement compliant, so it fits any MSA-compliant XFP cage and can be inserted or removed without powering down the system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.