We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Roll of red and white reflective gate arm tape, 2 inch width, alternating 16 inch sections

FindTape

FindTape Gate Arm Reflective Tape 2 in. x 50 yds. 16 in. Red/White GATE-RW-2x150

SKU CH-AAWC-MNWPK

Glass-bead retroreflective tape with 16-inch alternating red and white sections for gate-arm visibility up to 10 years outdoors

  • TypeTape
  • ColorRed/White
  • High-visibility barrier marking with 16-inch alternating red and white bands
  • Glass bead retroreflective surface returns headlight glare for night detection
  • Pressure-sensitive adhesive enables peel-and-stick installation on gate arms
  • Meets ASTM D4956 Type I and MUTCD 8C.04 traffic-control standards
  • Up to 10-year outdoor service life on rail crossings and parking gates

Gate Arm Reflective Tape

FindTape Gate Arm Reflective Tape is a hi-viz glass bead conspicuity tape designed for traffic control devices such as rail gate arms, boom barriers, parking gates, and crossing arms. The red and white sections alternate every 16 inches to ensure clear visibility in low light and poor weather.

Who This Suits

This tape suits facility managers and maintenance crews who need to mark gate arms at controlled access points for night-time safety. It is not for buyers who require a different alternating section length or a different colour pattern for their specific regulatory environment.

Bundled Accessories Impact

The tape ships on a 3 inch diameter core with a pressure-sensitive adhesive backing for peel-and-stick application. This construction allows direct installation onto clean, dry surfaces without the need for separate adhesives or mounting hardware.

Highlights

  • High-visibility barrier marking with 16-inch alternating red and white bands
  • Glass bead retroreflective surface returns headlight glare for night detection
  • Pressure-sensitive adhesive enables peel-and-stick installation on gate arms
  • Meets ASTM D4956 Type I and MUTCD 8C.04 traffic-control standards
  • Up to 10-year outdoor service life on rail crossings and parking gates

Specifications

TypeTape
ColorRed/White

Questions about this item

What surface must the gate arm have for the pressure-sensitive adhesive to bond properly?

The arm surface must be clean, fully dry and free of dirt, grease, dust and loose coatings before you apply the tape.

Will the 16 inch red and white alternating pattern meet the visibility requirements for my existing MUTCD-compliant gate arm?

Yes, the tape conforms to ASTM D4956 Type I and follows MUTCD Section 8C.04 for gate arms, matching the required alternating colour layout.

How can I confirm the retroreflective tape is performing correctly after installation?

Shine vehicle headlights at the arm from a distance at night; the red and white sections should appear bright and clearly defined, showing the glass bead retroreflection is working.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.