We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brown anti-static tape roll on 3 inch core with printed ESD symbol

FindTape

FindTape Conductive ESD Grid Anti-Static Tape Brown 48mm x 39 yds

SKU CH-5NWE-A98CJ

Conductive ESD grid tape shields static-sensitive components and circuit boards in protected areas, supplied on a 3 inch core

  • TypeElectrical Tape
  • ColorBrown
  • Shields EMI and ESD sensitive components from damage
  • Used inside an EPA to mask or hold circuit boards
  • Three-layer construction with buried conductive grid between copolymer layers
  • Anti-static non-sparking surface on both sides will not shed or crack
  • Packaged on 3 inch core with ESD symbol printed on tape

EPA Anti-Static Tape

This conductive ESD grid tape is designed for use inside an Electrostatic Protected Area where insulators must be removed. It masks or holds components and circuit boards while shielding them from EMI and ESD damage. The three-layer construction buries a conductive grid between two static-dissipating copolymer substrates. Both surfaces are non-sparking and will not shed, crack, chip, or rub off.

Replaces Standard Insulating Tapes

Ordinary plastic tapes generate static and offer no shielding, so they must be removed from an EPA. This tape upgrades that workflow by providing anti-static masking and holding in a single product. The jump is worth it whenever static-sensitive assemblies are handled, packaged, or grounded inside the protected area. It is not for applications that require non-conductive insulation or general-purpose sealing outside an EPA.

Sustained EPA Performance

The buried grid maintains consistent conductivity because it cannot wear away like a surface coating. Both outer layers remain intact under repeated handling, so shielding does not degrade during long production runs. The tape stays on a 3 inch core printed with the ESD symbol for easy identification. It is not suited for environments where the tape must survive extreme mechanical abrasion or chemical exposure.

Highlights

  • Shields EMI and ESD sensitive components from damage
  • Used inside an EPA to mask or hold circuit boards
  • Three-layer construction with buried conductive grid between copolymer layers
  • Anti-static non-sparking surface on both sides will not shed or crack
  • Packaged on 3 inch core with ESD symbol printed on tape

Specifications

TypeElectrical Tape
ColorBrown

Questions about this item

What core diameter does the 48 mm wide tape come on?

The tape is wound on a 3 inch diameter core, which is the standard size for most desktop dispensers.

How do I apply the anti-static tape so the conductive grid actually works?

Press the tape firmly onto clean component surfaces or board edges inside the EPA so both dissipative outer layers make full contact, avoiding air gaps that break the shielding path.

When should I replace a roll that has been in the EPA for a while?

Replace the roll if the brown surface shows cuts, heavy abrasion, or areas where the grid layer is visible, because damage to either outer layer lets static leak through.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.