We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fimco

Fimco 5010193 Nylon Tee 1/2 in indoor maintenance

SKU CH-BYXE-3EDZG

Nylon tee connects 1/2 in female pipe thread to 1/4 in port for Fimco spot sprayers

  • TypeBathroom Cleaners
  • Nylon construction resists corrosion for long service life
  • 1/2 in female pipe thread connects directly to Fimco spot sprayers
  • 1/4 in port allows accessory attachment without extra fittings
  • White colour aids visual inspection of fluid flow

Fimco 5010193 Nylon Tee for Spot Sprayers

This Fimco 5010193 nylon tee connects directly to all Fimco spot sprayers. It provides a 1/2 inch female pipe thread and a 1/4 inch port for fluid distribution. The white nylon construction suits general indoor maintenance tasks. It is not intended for high-pressure hydraulic systems or chemical transfer lines requiring metal fittings.

Thermals noise and power draw in normal use

This passive fitting generates no heat, noise or electrical draw during operation. Flow restriction depends on the connected sprayer pump and fluid viscosity. The nylon body resists corrosion from standard cleaning solutions. It does not contain moving parts, seals or electronics that require power or cooling.

Highlights

  • Nylon construction resists corrosion for long service life
  • 1/2 in female pipe thread connects directly to Fimco spot sprayers
  • 1/4 in port allows accessory attachment without extra fittings
  • White colour aids visual inspection of fluid flow

Specifications

BrandFIMCO
TypeBathroom Cleaners

Questions about this item

How do I install the Fimco 5010193 nylon tee on my spot sprayer without cross-threading the 1/2 in female pipe thread?

Wrap the male fitting with PTFE tape, hand-tighten the tee until snug, then finish with a wrench no more than one extra turn to seal the 1/2 in female pipe thread without stripping the nylon.

When should I replace the 1/4 in port on this nylon tee if it starts to leak during sprayer use?

Replace the tee immediately if the 1/4 in port shows cracks, white stress lines, or persistent dripping after re-taping, because nylon becomes brittle with age and chemical exposure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.