Filco
Filco 2 in 1 Accessory D500EPM-00 DPS-500AB-49A Power Supply 500W
500 W replacement PSU fits Dell Optiplex 7080MT, 7070MT, 7060MT, 3050MT, G5-5090, 3050, 3650, 3670, 3671, 5090, 5060, 3260, 3681 and XPS 8940 MT
- Delivers 500 W to power demanding Dell OptiPlex towers
- Wide 100-240 V input works worldwide without a voltage switch
- 4+4+6+6+8-pin connector set fits multiple motherboard layouts
- Replaces OEM part numbers 5K7J8 and Y7R0X for direct swap
- Brand-new unit supplied in original condition
Filco 500W Replacement Power Supply
This Filco 500W unit replaces Dell part numbers D500EPM-00, DPS-500AB-49A, H500EPM-00 and the listed service tags. It fits OptiPlex 7080MT, 7070MT, 7060MT, 3050MT, G5-5090, 3050, 3650, 3670, 3671, 5090, 5060, 3260, 3681 and XPS 8940 MT chassis. The supply accepts 100-240 V input at 50-60 Hz and delivers up to 500 W total DC output.
Suits owners of the listed Dell desktops needing
Builders working on non-Dell platforms or systems requiring a different connector layout should look elsewhere. The fixed cable harness provides 4+4+6+6+8 pin connectors only. Units that need extra auxiliary plugs, alternate main-power pinouts or higher total wattage are not supported by this model.
Connector layout is 4+4+6+6+8 pin
This single specification decides fitment because the Dell motherboards in the compatibility list expect exactly that arrangement. Verify the existing unit's plug pattern before ordering; a mismatch means the supply will not connect. No other connector variants are included in the box.
Highlights
- Delivers 500 W to power demanding Dell OptiPlex towers
- Wide 100-240 V input works worldwide without a voltage switch
- 4+4+6+6+8-pin connector set fits multiple motherboard layouts
- Replaces OEM part numbers 5K7J8 and Y7R0X for direct swap
- Brand-new unit supplied in original condition
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 500W D500EPM-00 power supply into a Dell Optiplex 7080MT, and which connector step is often missed?
Remove the side panel, unplug the old unit, fit the new supply into the chassis, then attach the 4+4 CPU, 6+6 PCIe and 8-pin motherboard connectors; the 8-pin motherboard plug is the one most often left loose.
What maintenance or replacement will the 500W DPS-500AB-49A need after extended use?
The internal fan bearings and electrolytic capacitors age first; expect to clean dust from the heatsink annually and plan on replacing the unit once voltages drift or the fan becomes noisy.
What limit appears first when the 500W supply runs continuously at full load in a Dell XPS 8940 MT?
The 500 W DC output ceiling is reached before any thermal throttle; sustained 500 W draw will trigger over-current protection and shut the unit down.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
