We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black FIFINE K688CT dynamic microphone on metal boom arm with USB and XLR connections

FIFINE K688CT USB/XLR Dynamic Microphone Kit with Boom Arm

SKU CH-4YZ2-09ANQ

A dynamic podcast microphone kit with USB and XLR outputs, a boom arm, tap-to-mute and real-time monitoring

  • ColorBlack
  • Microphone Sensitivity-58 decibels
  • Microphone Signal to Noise Ratio(SNR)80 decibels
  • Dual USB and XLR outputs suit both simple and advanced setups
  • Tap-to-mute button plus gain knob give instant on-mic control
  • Cardioid pickup and 80 dB SNR keep voice clear over background
  • 130 dB SPL handling captures loud sources without distortion
  • Metal boom arm supports up to 2 kg for stable positioning

Dual-Connection Dynamic Microphone Kit

The FIFINE K688CT combines USB and XLR outputs in a single dynamic capsule, letting creators plug straight into a computer or route through an external mixer. A cardioid pattern rejects off-axis sound while the 130 dB SPL handling keeps loud sources clean. Supplied boom arm supports devices up to 2 kg for stable desktop positioning.

Low-Noise Operation

Dynamic operation requires no phantom power, so the microphone draws only USB bus current when used in digital mode. Self-noise measures 58 dB sensitivity with an 80 dB signal-to-noise ratio, keeping the floor quiet during spoken-word sessions. Tap-to-mute and gain knob provide instant level control without software latency.

Integrated Monitoring and Mounting

Built-in headphone jack enables zero-latency monitoring with a dedicated volume knob for real-time mix adjustments. The all-metal boom arm clamps to desks and articulates without spring noise, while the included shock mount isolates the capsule from desk vibrations. No extra drivers or RGB software are required.

Highlights

  • Dual USB and XLR outputs suit both simple and advanced setups
  • Tap-to-mute button plus gain knob give instant on-mic control
  • Cardioid pickup and 80 dB SNR keep voice clear over background
  • 130 dB SPL handling captures loud sources without distortion
  • Metal boom arm supports up to 2 kg for stable positioning

Specifications

BrandFIFINE
ModelK688CT
Part NumberFFUSK688CT
ColorBlack
Microphone Sensitivity-58 decibels
Microphone Signal to Noise Ratio(SNR)80 decibels

Questions about this item

How do I attach the boom arm to my desk and what step is often missed?

Clamp the arm base to a desk edge up to the thickness allowed by the clamp, then tighten both knobs fully; the step people miss is securing the cable-management clips so the USB/XLR cable cannot pull on the mic capsule.

Which parts of the K688CT kit will need replacement first with regular use?

The foam windscreen compresses over time and should be swapped when it no longer springs back, and the boom-arm tension springs may lose stiffness after heavy daily adjustment.

At what sound-pressure level does the dynamic capsule start to distort during loud streaming sessions?

The capsule handles up to 130 dB SPL before distortion appears, so normal vocal peaks stay well within clean headroom.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.