We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP+ transceiver module with simplex LC port and side label

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd SFP+ BIDI Transceiver Tx1550nm Rx1490nm 80KM

SKU CH-WNWA-DEYRS

A 10 Gbps bidirectional SFP+ transceiver sending at 1550 nm and receiving at 1490 nm over single-mode fibre for 80 km links

  • Device TypeTransceiver
  • Fiber CableSingle-mode Optical Fiber
  • Ports10GBase-BX Ethernet
  • Transfer Rate10 Gbps
  • 10 Gbps bi-directional throughput over a single fibre strand
  • 80 km reach on single-mode cable with 1550 nm TX and 1490 nm RX
  • Hot-pluggable SFP+ form factor compliant with SFF-8431 MSA
  • Multi-rate support from 8.5 Gbps to 11.32 Gbps for Ethernet, Fibre Channel, CPRI and OTN
  • TAA-compliant manufacture in Taiwan with custom coding for Cisco, Juniper and other open switches

10G SFP+ BIDI Transceiver 80KM

This 10G SFP+ bidirectional transceiver operates over single-mode fiber at a 1550nm transmit and 1490nm receive wavelength. It supports link distances up to 80km and connects via a simplex LC interface. The module is hot-pluggable and compliant with the SFF-8431 MSA for mechanical and electrical compatibility. It targets network operators extending 10G Ethernet or Fibre Channel links across metro spans.

Upgrade from shorter-reach BIDI optics

The 80km reach replaces 10km, 20km, 40km or 60km bidirectional modules when the optical path exceeds those distances. The jump is worth it when the link budget requires the extra margin provided by the 1550nm EML transmitter and APD receiver pair. It also suits migrations from 8.5G Fibre Channel or SONET OC-192 services that need the longer span without changing the fiber plant.

Sustained multi-rate operation

The transceiver supports continuous data rates from 8.5Gbps to 11.32Gbps covering 10GBASE Ethernet, 8G and 10G Fibre Channel, OTN OTU2/2e/2f and CPRI Option 7 and 8. Digital diagnostic monitoring via the 2-wire interface compliant with SFF-8472 allows real-time tracking of temperature, voltage and optical power during extended operation. A single 3.3V supply powers the module throughout the commercial temperature range.

Highlights

  • 10 Gbps bi-directional throughput over a single fibre strand
  • 80 km reach on single-mode cable with 1550 nm TX and 1490 nm RX
  • Hot-pluggable SFP+ form factor compliant with SFF-8431 MSA
  • Multi-rate support from 8.5 Gbps to 11.32 Gbps for Ethernet, Fibre Channel, CPRI and OTN
  • TAA-compliant manufacture in Taiwan with custom coding for Cisco, Juniper and other open switches

Specifications

Device TypeTransceiver
Fiber CableSingle-mode Optical Fiber
Ports10GBase-BX Ethernet
Transfer Rate10 Gbps

Questions about this item

Does the 80 km SFP+ BIDI module use a simplex LC connector for single-mode fiber?

Yes, the transceiver has a simplex LC connector and is designed for single-mode fiber links up to 80 km.

Is the module hot-pluggable into a standard SFP+ cage without powering down the switch?

It complies with SFF-8431 SFP+ MSA and is hot-pluggable; insert or remove it while the host is powered on.

Will the APD receiver and EML laser need periodic cleaning or replacement?

The optical interfaces should be cleaned with a lint-free swab and isopropyl alcohol whenever signal loss is observed; no scheduled replacement is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.