We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver transceiver module with duplex LC ports

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd 25G SFP28 CWDM Transceiver 1310nm 10km SMF Commercial Temperature

SKU CH-03CM-T4X69

A 25 Gbps SFP28 CWDM transceiver operating at 1310 nm over single-mode fibre for 10 km links with 1.4 W maximum power consumption

  • Device TypeTransceiver
  • Wavelength1310nm
  • Fiber CableSingle-mode Optical Fiber
  • Ports25GBASE-LR Ethernet
  • Transfer Rate25 Gbps
  • 25 Gbps data rate for high-speed 25GBASE-LR Ethernet
  • 10 km reach over single-mode fiber at 1310 nm wavelength
  • Low 1.4 W power draw with built-in CDR on both sides
  • Hot-pluggable SFP28 MSA form factor with duplex LC connector
  • TAA compliant and coded for Cisco, Juniper and open switches

25G SFP28 CWDM Transceiver

This transceiver delivers 25 Gbps over single-mode fibre using a 1310 nm CWDM wavelength. It is built for 10 km links in 25GBASE-LR Ethernet, CPRI Option 10 and eCPRI 5G mobile networks. The module suits network engineers deploying coarse WDM infrastructure in commercial-temperature environments. It arrives new and coded for the target switch platform.

Compatibility and host requirements

The unit follows the SFF-8402 SFP28 MSA and uses a duplex LC connector with a 3.3 V supply. Before ordering, confirm the host switch or router accepts third-party SFP28 modules and provide the exact brand and model so the correct vendor coding can be programmed. The 2-wire management interface complies with SFF-8472 for diagnostic monitoring. Verify the equipment supports IEEE 802.3 cc 25GBASE-LR or CPRI 24.33 G operation.

Thermals, noise and power

Maximum power draw is 1.4 W from a single 3.3 V rail, so thermal load inside the chassis remains low. The uncooled CWDM DFB laser and integrated CDR on both transmitter and receiver operate without active cooling, keeping acoustic noise at zero. Hot-pluggable insertion allows installation or replacement without powering down the host system. RoHS compliance confirms restricted-substance adherence.

Highlights

  • 25 Gbps data rate for high-speed 25GBASE-LR Ethernet
  • 10 km reach over single-mode fiber at 1310 nm wavelength
  • Low 1.4 W power draw with built-in CDR on both sides
  • Hot-pluggable SFP28 MSA form factor with duplex LC connector
  • TAA compliant and coded for Cisco, Juniper and open switches

Specifications

Device TypeTransceiver
Wavelength1310nm
Fiber CableSingle-mode Optical Fiber
Ports25GBASE-LR Ethernet
Transfer Rate25 Gbps

Questions about this item

What comes in the box with the 25G SFP28 CWDM transceiver and do I need to buy cables separately?

The module ships with a duplex LC connector installed. You must supply single-mode fibre patch cables with LC terminations to complete the link.

How do I choose between the listed wavelength and distance options for this module?

This unit is fixed at 1310 nm CWDM with a 10 km reach on single-mode fibre; there are no alternative wavelength or distance variants to select.

What does the 25.78 Gbps headline rate mean once the transceiver is running in my switch?

It supports 25GBASE-LR Ethernet at 25.78 Gbps and CPRI Option 10 at 24.33 Gbps, with built-in CDR on both transmitter and receiver for signal integrity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.