We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP+ transceiver module with duplex LC port and metallic finish

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd 10G SFP+ Transceiver 80km 1550nm Commercial Temperature

SKU CH-D6SC-ZC7MS

10 Gbps single-mode SFP+ transceiver reaching 80 km over 1550 nm duplex LC with multi-rate support from 8.5 to 11.32 Gbps

  • Device TypeTransceiver
  • Fiber CableSingle-mode Optical Fiber
  • Ports10GBASE-ZR/ZW Ethernet
  • Transfer Rate10 Gbps
  • 80 km reach over single-mode fiber with 1550 nm EML laser
  • Multi-rate 8.5–11.32 Gbps supports 10G Ethernet, Fibre Channel, OTN and CPRI
  • Hot-pluggable SFP+ MSA form factor enables tool-free installation
  • Digital diagnostics via SFF-8472 two-wire interface for real-time monitoring
  • TAA compliant and manufactured in Taiwan for regulated procurement

10G SFP+ ZR 80km 1550nm Module

This 10G SFP+ transceiver delivers 10 Gbps over single-mode fiber at 1550 nm wavelength. It reaches 80 km link distance using a duplex LC connector and operates from a single 3.3 V supply. The module is hot-pluggable and compliant with SFF-8431 MSA and SFF-8472 diagnostics.

Network links needing 80 km reach

It suits 10GBASE-ZR/ZW Ethernet, 8GFC, 10GFC, OC-192/STM-64, CPRI Option 7/8 and OTN OTU2/OTU2e/OTU2f rates between 8.5 Gb/s and 11.32 Gb/s. It is not for multi-mode fiber runs or shorter-reach applications such as SR, LRM, LRL, LR, LR20 or ER variants. Buyers who need distances beyond 80 km should consider ZR100 modules.

80 km single-mode reach at 1550 nm

The 1550 nm EML transmitter and APD receiver enable 80 km transmission on standard single-mode fiber. This reach specification is the decisive parameter; verify that your link budget and host equipment coding match before ordering.

Highlights

  • 80 km reach over single-mode fiber with 1550 nm EML laser
  • Multi-rate 8.5–11.32 Gbps supports 10G Ethernet, Fibre Channel, OTN and CPRI
  • Hot-pluggable SFP+ MSA form factor enables tool-free installation
  • Digital diagnostics via SFF-8472 two-wire interface for real-time monitoring
  • TAA compliant and manufactured in Taiwan for regulated procurement

Specifications

Device TypeTransceiver
Fiber CableSingle-mode Optical Fiber
Ports10GBASE-ZR/ZW Ethernet
Transfer Rate10 Gbps

Questions about this item

Will this 80 km SFP+ module link reliably with my existing 10GBASE-LR 10 km optics on the same switch?

No — this ZR module uses a 1550 nm EML laser and APD receiver designed for 80 km single-mode links, while LR optics operate at 1310 nm for 10 km; mismatched wavelengths and power budgets will cause errors.

How can I verify the transceiver is operating correctly once installed?

The module implements the 2-wire SFF-8472 diagnostic interface, so your switch can report real-time temperature, voltage, Tx/Rx optical power and laser bias current to confirm healthy operation.

What ships with the transceiver and what must I purchase separately?

Only the SFP+ module itself is supplied; you must buy duplex LC single-mode patch cords and ensure your switch ports are coded for this vendor’s module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.