We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small gold SFP+ transceiver module with duplex LC ports and a coloured latch

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd 10G CWDM SFP+ Transceiver 1350-1570nm SMF 10km Commercial Temperature

SKU CH-XRD2-74MFW

A 10 Gbps CWDM SFP+ transceiver covering 1350 nm to 1570 nm for 10 km single-mode links, hot-pluggable with Duplex LC and multi-rate support from 8.5 Gbps to 11.32 Gbps

  • Device TypeTransceiver
  • Fiber CableSingle-mode Optical Fiber
  • Ports10GBASE-LR/LW Ethernet
  • Transfer Rate10 Gbps
  • 10 Gbps multi-rate throughput from 8.5 to 11.32 Gb/s
  • 10 km reach over single-mode fiber at CWDM wavelengths
  • Hot-pluggable SFP+ module compliant with SFF-8431 MSA
  • 18 selectable CWDM wavelengths between 1270 nm and 1610 nm
  • TAA compliant and manufactured in Taiwan with RoHS certification

10G CWDM SFP+ Transceiver for 10km Links

This 10G CWDM SFP+ transceiver operates across 1350nm to 1570nm wavelengths over single-mode fiber up to 10km. It supports multi-rate data from 8.5Gb/s to 11.32Gb/s and complies with SFP+ MSA and IEEE 802.3ae 10GBASE-LR/LW. The module suits enterprise and carrier networks needing wavelength-division multiplexing.

Replaces Fixed-Wavelength or Shorter-Reach Modules

Upgrade when your link requires a specific CWDM channel between 1350nm and 1570nm or when extending reach beyond standard 10km grey optics. The jump is worth it for CPRI Option 7/8, OTN OTU2 variants, or 10G Fibre Channel where the 10km span and wavelength plan match your design. It does not serve links needing 20km, 40km, 60km, 80km or 100km reach.

Check Switch Coding, Wavelength and Fiber Type

Verify your switch or router accepts third-party SFP+ coding; the supplier programs the module to your host brand and model. Confirm the exact wavelength you need from the 18 available channels (1270nm to 1610nm) and that your patch cables are duplex LC single-mode. Ensure the host provides a single +3.3V supply and supports SFF-8472 diagnostics.

Highlights

  • 10 Gbps multi-rate throughput from 8.5 to 11.32 Gb/s
  • 10 km reach over single-mode fiber at CWDM wavelengths
  • Hot-pluggable SFP+ module compliant with SFF-8431 MSA
  • 18 selectable CWDM wavelengths between 1270 nm and 1610 nm
  • TAA compliant and manufactured in Taiwan with RoHS certification

Specifications

Device TypeTransceiver
Fiber CableSingle-mode Optical Fiber
Ports10GBASE-LR/LW Ethernet
Transfer Rate10 Gbps

Questions about this item

Which duplex LC connector and SFP+ cage dimensions does this 10G CWDM transceiver need for installation?

It fits any standard SFP+ cage that follows the SFF-8431 MSA and connects through a duplex LC interface on single-mode fiber.

What is the common installation mistake when inserting this hot-pluggable module into a Cisco or Juniper switch?

The module must be coded for the target brand before insertion; skipping that step causes the port to reject the transceiver.

When should the 3.3 V power supply or the single-mode patch cords be checked on this 10 km CWDM link?

Inspect the patch cords for contamination or bend loss if the SFF-8472 diagnostic monitor reports rising Rx power alarms.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.