We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact SFP+ transceiver module with duplex LC ports and a metal housing

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd 10G CWDM SFP+ Transceiver 1350-1450nm 20km

SKU CH-V1F1-N78AG

A 10 Gbps CWDM SFP+ transceiver for single-mode fibre links up to 20 km

  • Device TypeTransceiver
  • Fiber CableSingle-mode Optical Fiber
  • Ports10GBASE-LR/LW Ethernet
  • Transfer Rate10 Gbps
  • 10 Gbps throughput for high-speed links
  • 20 km reach over single-mode fiber
  • CWDM wavelengths 1350-1450 nm for channel flexibility
  • Hot-pluggable SFP+ MSA design for easy deployment
  • Multi-rate support from 8.5 to 11.32 Gbps for diverse protocols

10G CWDM SFP+ Transceiver for Metro Networks

This transceiver delivers 10 Gbps over single-mode fibre using CWDM wavelengths between 1350 nm and 1450 nm. It is built for service-provider and enterprise links that need coarse wavelength division multiplexing across a 20 km span. The module fits any SFP+ port coded for the target switch platform. Buyers who need reach beyond 20 km or a different wavelength band should select another model.

Duplex LC Connector and 20 km SMF Reach

The single specification that decides fit is the 20 km link distance over standard single-mode fibre with a duplex LC interface. The module complies with IEEE 802.3ae 10GBASE-LR/LW and supports multi-rate operation from 8.5 Gbps to 11.32 Gbps. If your link budget, fibre type or connector differs, this transceiver will not work.

Low-Power Uncooled DFB Laser Operation

An uncooled CWDM DFB laser and PIN receiver run on a single 3.3 V supply, keeping heat output low in dense patch panels. The hot-pluggable SFP+ form factor allows insertion without powering down the switch. Digital diagnostics over the two-wire SFF-8472 interface let operators monitor temperature, voltage and optical power in real time.

Highlights

  • 10 Gbps throughput for high-speed links
  • 20 km reach over single-mode fiber
  • CWDM wavelengths 1350-1450 nm for channel flexibility
  • Hot-pluggable SFP+ MSA design for easy deployment
  • Multi-rate support from 8.5 to 11.32 Gbps for diverse protocols

Specifications

Device TypeTransceiver
Fiber CableSingle-mode Optical Fiber
Ports10GBASE-LR/LW Ethernet
Transfer Rate10 Gbps

Questions about this item

What does the 20 km reach mean once the module is installed in a switch?

It supports a 20 km link over single-mode fiber at 10 Gbps, covering 10GBASE-LR/LW Ethernet, 8/10 G Fibre Channel, SONET OC-192, CPRI Option 7/8 and OTN OTU2 rates.

Which SFP+ standard governs the electrical interface and what does it cap?

The module follows SFF-8431 SFP+ MSA, limiting the electrical interface to 3.3 V supply and a 2-wire management bus per SFF-8472, with data rates from 8.5 to 11.32 Gb/s.

What physical connector and fiber type are required to mount this transceiver?

It uses a duplex LC connector and must be paired with single-mode fiber; the latch colour indicates the exact CWDM wavelength between 1350 nm and 1450 nm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.