We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP+ transceiver module with a single LC port and side bail latch

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd 10G BIDI SFP+ Transceiver Tx1330nm Rx1270nm SMF 60km

SKU CH-QXT9-1SYD4

A 10 Gbps bidirectional SFP+ transceiver using Tx 1330 nm and Rx 1270 nm wavelengths for 60 km single-mode fibre links

  • Device TypeTransceiver
  • Fiber CableSingle-mode Optical Fiber
  • Ports10GBase-BX Ethernet
  • Transfer Rate10 Gbps
  • 10 Gbps bidirectional throughput over a single fibre strand
  • 60 km reach on single-mode fibre with 1330 nm TX and 1270 nm RX
  • Hot-pluggable SFP+ form factor compliant with SFF-8431 MSA
  • Digital diagnostic monitoring via SFF-8472 two-wire interface
  • TAA-compliant manufacture in Taiwan with multi-rate support from 8.5 to 11.32 Gbps

10G BIDI SFP+ Transceiver for 60 km Links

This single-mode transceiver delivers 10 Gbps over a simplex LC connection using Tx 1330 nm and Rx 1270 nm wavelengths. It suits network operators extending 10GBASE-BX links to 60 km without intermediate amplification. The module is hot-pluggable and coded for broad switch compatibility. It targets teams that need a drop-in spare for existing BIDI infrastructure.

Thermals and Power on a 3.3 V Rail

The unit draws power from a single 3.3 V supply and runs within the commercial temperature range specified by the vendor. A 1330 nm DFB laser and APD receiver keep optical margins stable across the 60 km span. No active cooling is required inside the SFP+ cage. Power draw stays within MSA limits for dense line-card deployments.

Sustained Load Across Multi-Rate Protocols

The transceiver supports continuous operation from 8.5 Gbps up to 11.32 Gbps covering 10G Ethernet, 8G/10G Fibre Channel, OTN OTU2/OTU2e/OTU2f and CPRI options 7 and 8. Diagnostic monitoring via the 2-wire SFF-8472 interface reports real-time temperature, voltage and optical levels. Link integrity is maintained over the full 60 km without error-rate degradation during prolonged traffic.

Highlights

  • 10 Gbps bidirectional throughput over a single fibre strand
  • 60 km reach on single-mode fibre with 1330 nm TX and 1270 nm RX
  • Hot-pluggable SFP+ form factor compliant with SFF-8431 MSA
  • Digital diagnostic monitoring via SFF-8472 two-wire interface
  • TAA-compliant manufacture in Taiwan with multi-rate support from 8.5 to 11.32 Gbps

Specifications

Device TypeTransceiver
Fiber CableSingle-mode Optical Fiber
Ports10GBase-BX Ethernet
Transfer Rate10 Gbps

Questions about this item

How do I install the 10G BIDI SFP+ transceiver into a switch port without damaging the LC connector?

Insert the module into an SFP+ cage until it clicks, then attach the simplex LC patch cord straight in — forcing it at an angle cracks the ferrule and ruins the 1330 nm DFB laser alignment.

What maintenance does the APD receiver need after the link has been live for months?

No scheduled maintenance is required; if bit errors rise, clean the LC end-face with a one-click cleaner and re-check the 2-wire SFF-8472 diagnostic registers for receive-power alarms.

At what distance does the 60 km single-mode link hit its power budget limit first?

The 60 km SMF reach is the design limit; beyond that the 1330 nm Tx / 1270 nm Rx budget cannot overcome attenuation and dispersion, so errors appear before any thermal throttle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.