We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
FIBBR fiber optic DisplayPort cable with directional connectors, 3 metre length

FIBBR

FIBBR Certified Fiber Optic DisplayPort 2.1 Cable 3M

SKU CH-BPDT-RHBZN

Fiber-optic DisplayPort 2.1 cable carries 80 Gbps for 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz with HDR and ARC support

  • 80 Gbps bandwidth enables 16K at 60 Hz visuals
  • 10K at 60 Hz and 8K at 120 Hz supported for high-resolution clarity
  • 4K at 240 Hz and 2K at 360 Hz deliver ultra-smooth gaming motion
  • 4K at 165 Hz with HDR and HDCP 2.2 ensures vibrant protected content
  • One-way fibre design provides reliable 3 metre plug-and-play installation

Certified Fiber Optic DisplayPort 2.1

This active optical cable transmits video data at 80Gbps using fiber technology. It supports Dynamic HDR, HDCP 2.2, DSC 1.2a and ARC for high-fidelity audio return. The three-metre length suits desktop PCs, laptops and graphics cards driving high-resolution monitors, TVs or projectors. It is a new, plug-and-play solution requiring no drivers.

Upgrading from copper DisplayPort cables

Copper cables often lose signal integrity beyond short distances at high bandwidth. This fiber optic link maintains 80Gbps across the full 3M span, enabling 16K@60Hz, 10K@60Hz, 8K@120Hz, 5K@60Hz, 4K@240Hz and 2K@360Hz. The jump is worth it when your display and source both support DP 2.1 and you need reliable throughput at these resolutions and refresh rates.

Installing the directional cable

Connect the end marked SOURCE to the graphics card or host device and the end marked DISPLAY to the monitor. The one-way transmission design means reversed connections will yield no image. No adapters or software are required, but verify port orientation before routing the cable through tight channels.

Highlights

  • 80 Gbps bandwidth enables 16K at 60 Hz visuals
  • 10K at 60 Hz and 8K at 120 Hz supported for high-resolution clarity
  • 4K at 240 Hz and 2K at 360 Hz deliver ultra-smooth gaming motion
  • 4K at 165 Hz with HDR and HDCP 2.2 ensures vibrant protected content
  • One-way fibre design provides reliable 3 metre plug-and-play installation

Specifications

No published specifications for this item yet.

Questions about this item

What length and connector orientation does this 3 m fibre-optic DisplayPort 2.1 cable require for a clean run?

The cable measures 9.84 ft (3 m) end-to-end and has a fixed SOURCE plug for the GPU and a fixed DISPLAY plug for the monitor; both are standard full-size DisplayPort connectors.

Which end must go into the graphics card during installation, and what happens if they are swapped?

Connect the end marked SOURCE to the PC or graphics card and the end marked DISPLAY to the screen; the link is one-way, so reversing the plugs will give no signal.

How often should the fibre cores inside this 80 Gbps DisplayPort 2.1 cable be inspected or replaced?

No periodic inspection or replacement is needed — the active optical engine is sealed, driver-free and rated for continuous use at the supported 16K 60 Hz, 8K 120 Hz and 4K 240 Hz modes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.