FIBBR
FIBBR 2 in 1 Accessory 100 ft HDMI 2.1 48Gbps 8K@60Hz 4K@120Hz
A 100 ft fibre-optic HDMI 2.1 cable delivering 48 Gbps for 8K at 60 Hz and 4K at 120 Hz with zero interference
- 8K at 60 Hz via HDMI 2.1 48 Gbps bandwidth
- 4K at 120 Hz for smooth next-gen console gaming
- Fiber-optic link immune to EMI and RFI interference
- Zero signal loss over 100 ft without repeaters
- Directional design with marked source and display ends
Directional HDMI 2.1 Cable 100 ft
This fiber-optic cable carries HDMI 2.1 signals at 48 Gbps over a 100 ft run. It is built for installers who need 8K at 60 Hz or 4K at 120 Hz between a source device and a distant display. The directional design requires the marked SOURCE and DISPLAY ends to be connected correctly for the link to work.
Sustained Signal Integrity Over Distance
Converting electrical signals to light eliminates EMI and RFI interference, so the cable maintains full bandwidth without degradation, freezing or dropouts even when routed beside power cables. The manufacturer states stable transmission is possible up to 1000 ft, well beyond the 100 ft length supplied here.
HDMI 2.1 Feature Limits at Length
HDMI 2.1 functions including VRR, ALLM, QMS, QFT, DSC, HDCP 2.2 and 2.3, plus DTS:X and Dolby audio pass-through are supported at this length. ARC and eARC are not available on cables of 65 ft or longer, so shorter runs are needed for audio return channel applications.
Highlights
- 8K at 60 Hz via HDMI 2.1 48 Gbps bandwidth
- 4K at 120 Hz for smooth next-gen console gaming
- Fiber-optic link immune to EMI and RFI interference
- Zero signal loss over 100 ft without repeaters
- Directional design with marked source and display ends
Specifications
No published specifications for this item yet.
Questions about this item
Does the fiber-optic construction keep the 100 ft cable from heating up or drawing extra power during all-day 8K@60Hz use?
The cable converts electrical signals to light using YOFC fiber technology, so it transmits 48 Gbps without the resistive heating or high power draw typical of copper at this length.
Which HDMI 2.1 source devices can drive this directional cable correctly when the SOURCE end is plugged into them?
Any HDMI 2.1 source — such as a PS5, Xbox Series X, modern GPU or 8K media player — that outputs up to 8K@60Hz or 4K@120Hz will drive the SOURCE end; the DISPLAY end then connects to the projector or TV.
Will the 100 ft length still pass 4K@120Hz VRR and ALLM to an older HDMI 2.0 display without handshake issues?
Yes — the cable supports HDMI 2.1 features including VRR and ALLM, and its fiber-optic link maintains signal integrity up to 1000 ft, so a 2.0 display will negotiate its maximum 4K@60Hz cleanly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
