Fiabtool FB-TM-1.8M-01 1.8 m Clear Extension Cord 18 AWG 10 A 125 V 1250 W 2-Prong
A 1.8 m clear 18 AWG extension cord rated 10 A, 125 V and 1250 W with a polarised 2-prong plug for indoor use
- FeaturesThis 6FT power extension cord is made by Fiabtool and featur
- Invisible clear PVC design blends into any room
- Polarised 2-prong plug rated 10 A 125 V for safety
- 18 AWG copper conductors handle up to 1250 W
- 8 m length reaches outlets behind furniture
- UL listed for indoor home and office use
Clear Indoor Extension Cord
The Fiabtool FB-TM-1.8M-01 is a 1.8 metre clear extension cord rated for 10 A at 125 V with a maximum load of 1250 W. It uses 18 AWG copper wire and features a polarised 2-prong plug with a single outlet. The cord is UL listed for indoor use only.
Ideal for Discreet Power Runs
The transparent PVC jacket makes the cord nearly invisible against floors and baseboards, suiting home and office setups where visual clutter must be minimised. It is not for outdoor use, wet locations, or loads exceeding 1250 W. Builders needing multiple outlets or a grounded three-prong connection should look elsewhere.
Single Outlet and Polarised Plug
The bundled design provides one polarised outlet, ensuring correct hot-neutral orientation for connected lamps or small appliances. No switches, surge protection, or additional accessories are included. The clear insulation is the only feature that changes the installation aesthetic.
Highlights
- Invisible clear PVC design blends into any room
- Polarised 2-prong plug rated 10 A 125 V for safety
- 18 AWG copper conductors handle up to 1250 W
- 8 m length reaches outlets behind furniture
- UL listed for indoor home and office use
Specifications
| Brand | Fiabtool |
|---|---|
| Model | FB-TM-1.8M-01 |
| Features | This 6FT power extension cord is made by Fiabtool and features a style with material. It supports a voltage of 110 volts and an input current of . The cable is Clear No Switch 10A 1250W in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries. |
Questions about this item
What voltage rating must the wall outlet and the device I plug in share to use this 125 V cord safely?
Both the outlet and the connected device must be rated for 125 V operation, matching the cord's 125 V specification.
Can I run a legacy lamp that draws 1 A through this 10 A cord without any issue?
Yes, a 1 A load is well within the cord's 10 A capacity and 1250 W maximum power rating.
How can I confirm the cord is carrying power correctly once it is plugged in?
The connected device will operate normally, showing its usual power indicator or function when the cord is properly seated.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



