Festo
Festo VSVA-B-M52-MZD-D2-2AT1L 5/2 Solenoid Valve 52mm 110V AC
5/2 monostable solenoid valve, 52 mm wide, 2900 l/min flow, 110 V AC coil, IP65, ISO 5599-2 sub-base mounting
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 5/2 monostable valve gives precise directional control
- 2900 l/min flow rate supports high-demand pneumatic systems
- 110V AC coil with 1.6 VA power suits standard industrial supplies
- IP65 and NEMA 4 rating protects against dust and water jets
- ISO 5599-2 sub-base mounting enables flexible installation
Product identity
The Festo VSVA-B-M52-MZD-D2-2AT1L is a 5/2 monostable solenoid valve with a 52 mm width and a standard nominal flow rate of 2900 l/min. It operates on 110 V AC at 50/60 Hz and conforms to ISO 5599-2 with a G1/2 sub-base interface.
Suitability
This valve suits pneumatic systems requiring pilot-controlled actuation with external pilot air supply and a mechanical spring reset. It is not for applications needing a different operating voltage, a detenting-only manual override, or a valve function other than 5/2 monostable.
Deciding specification
The 110 V AC coil with 1.6 VA power consumption determines electrical compatibility, while the 52 mm width and ISO 5599-2 sub-base pattern decide mechanical fit in the manifold.
Highlights
- 5/2 monostable valve gives precise directional control
- 2900 l/min flow rate supports high-demand pneumatic systems
- 110V AC coil with 1.6 VA power suits standard industrial supplies
- IP65 and NEMA 4 rating protects against dust and water jets
- ISO 5599-2 sub-base mounting enables flexible installation
Specifications
| Brand | FESTO |
|---|---|
| Model | VSVA-B-M52-MZD-D2-2AT1L |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What sub-base standard and port size must my manifold provide for this 52 mm wide valve?
The valve mounts on a G1/2 sub-base that follows ISO 5599-2 size 2, matching the 52 mm width specification.
Will the 110 V AC coil operate correctly on a 60 Hz supply as well as 50 Hz?
Yes, the coil is rated for 110/120 V AC at both 50 Hz and 60 Hz with a power draw of 1.6 VA.
How can I confirm the valve is switching after installation?
An integrated LED signal status display lights when the solenoid is energised, giving immediate visual confirmation of operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
