Festo
Festo MHP2-M1H-3/2O-M5 Solenoid Valve 196142 10 mm
A 10 mm wide normally open 3/2 solenoid valve for pneumatic control testing
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Compact 10 mm width fits tight pneumatic panels
- 3/2 normally-open function enables direct actuator control
- Festo precision engineering ensures reliable switching cycles
- Red colour coding allows instant circuit identification
- Supplied as single unit in protective box
10 mm Solenoid Valve
The Festo MHP2-M1H-3/2O-M5 is a 10 mm wide solenoid valve designed for pneumatic control systems. It operates as a 3/2 normally open valve to direct compressed air in automation tasks. The unit is supplied new in a single pack under part number 196142.
Suitable Applications
This valve suits engineers building or maintaining pneumatic circuits that require a compact 10 mm body. It is not for installers who need a larger flow capacity or a different port configuration than the M5 connection provides. Buyers seeking a normally closed function should select an alternative model.
Critical Specification
The defining specification is the 10 mm valve width combined with the 3/2 normally open pneumatic function. This physical envelope and flow logic determine whether the component fits the manifold and executes the required control sequence. Verify both parameters against your system design before ordering.
Highlights
- Compact 10 mm width fits tight pneumatic panels
- 3/2 normally-open function enables direct actuator control
- Festo precision engineering ensures reliable switching cycles
- Red colour coding allows instant circuit identification
- Supplied as single unit in protective box
Specifications
| Brand | Festo |
|---|---|
| Model | MHP2-M1H-3/2O-M5 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What pneumatic fitting size must my tubing or manifold have to connect the M5 ports on this valve?
The valve uses M5 threaded ports, so your tubing fittings or manifold must match M5 thread to seal correctly.
Will the 10 mm wide body of the MHP2-M1H-3/2O-M5 fit on a standard 10 mm valve manifold rail I already use?
Yes, the 10 mm body width matches common 10 mm manifold spacing, allowing direct mounting alongside existing valves on the same rail.
How can I confirm the 3/2 normally-open function is operating after I install the valve?
Apply the rated voltage to the coil and verify that air flows from port 1 to port 2 when de-energised and stops when energised, matching the 3/2 normally-open symbol.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
