Festo
Festo DSBG-40-200-PPSA-N3 ISO cylinder 40 200 1646566
ISO pneumatic cylinder with 40 mm bore and 200 mm stroke for automated linear motion
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- ISO-standard cylinder for reliable pneumatic motion
- 40 mm bore and 200 mm stroke suit compact automation
- Red finish aids quick visual identification in panels
- Supplied as a single unit in protective box
- Manufacturer backs parts for three years and labour for one year
ISO Cylinder for Pneumatic Systems
The Festo DSBG-40-200-PPSA-N3 is an ISO-standard pneumatic cylinder built for linear motion tasks in automation and machine-building. It suits engineers and maintenance teams who need a reliable actuator with a 40 mm bore and 200 mm stroke for new installations or replacements.
Thermals Noise and Power Draw
As a purely pneumatic device the cylinder generates no electrical heat and draws no current during operation. Noise is limited to the exhaust air of the connected valve and the mechanical impact at end-of-stroke, both of which are managed by the surrounding air-preparation and cushioning choices.
Bore and Stroke Define Fit
The 40 mm bore and 200 mm stroke determine the force output and travel distance, making them the critical dimensions for matching the cylinder to the application. Buyers who need a different force profile or a longer or shorter travel must select a variant with other bore and stroke values.
Highlights
- ISO-standard cylinder for reliable pneumatic motion
- 40 mm bore and 200 mm stroke suit compact automation
- Red finish aids quick visual identification in panels
- Supplied as a single unit in protective box
- Manufacturer backs parts for three years and labour for one year
Specifications
| Brand | FESTO |
|---|---|
| Model | DSBG-40-200-PPSA-N3 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I mount the DSBG-40-200-PPSA-N3 ISO cylinder and what alignment step is often missed?
Secure the cylinder using its standard ISO mounting pattern, then align the piston rod precisely with the load to avoid side-loading the 40 mm bore.
Which wear items on the DSBG-40-200-PPSA-N3 will need replacement and when?
Plan to replace the rod seal, piston seal and cushioning seals after roughly three years or when air leakage appears at the 200 mm stroke ends.
What is the first performance limit reached during continuous cycling of the DSBG-40-200-PPSA-N3?
The cushioning capacity at the 200 mm stroke ends becomes the limiting factor, causing increased impact noise and reduced positioning repeatability.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
