We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Festo ISO cylinder model DSBG-160-100-PPVA-N3

Festo

Festo DSBG-160-100-PPVA-N3 ISO Cylinder 160 100 electrician tool

SKU CH-9MSJ-Z6P7N MPN DSBG-160-100-PPVA-N3

ISO cylinder with 160 mm bore and 100 mm stroke for pneumatic automation tasks

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • ISO cylinder rated for 160 mm bore and 100 mm stroke
  • New Festo unit with part number 2029466 ready for installation
  • Red finish provides clear visibility in workshop environments
  • Supplied as a single pack in a protective box
  • Test equipment classification suits precision pneumatic applications

ISO cylinder for electricians

The Festo DSBG-160-100-PPVA-N3 is an ISO standard pneumatic cylinder supplied as test equipment for electrical professionals. It carries the manufacturer part number 2029466 and arrives in a single-box pack finished in red. The unit is intended for integration into automation or maintenance rigs that require a 160 millimetre bore and 100 millimetre stroke.

Pneumatic operation without electrical heat

Because the cylinder is driven by compressed air, it produces no electrical heat and generates only the noise of the surrounding pneumatic circuit during normal cycling. Power draw is limited to the pilot valve or control system chosen by the installer, leaving the cylinder itself thermally neutral in service.

Mounts to ISO patterns and frees electrical space

The cylinder conforms to ISO mounting dimensions, so it bolts directly to standard brackets without custom adapters. Its pneumatic action removes the need for a motor or gearbox at the point of motion, freeing cabinet space for wiring, terminals or other electrical components. The three-year parts and one-year labour coverage applies to the cylinder assembly only.

Highlights

  • ISO cylinder rated for 160 mm bore and 100 mm stroke
  • New Festo unit with part number 2029466 ready for installation
  • Red finish provides clear visibility in workshop environments
  • Supplied as a single pack in a protective box
  • Test equipment classification suits precision pneumatic applications

Specifications

BrandFESTO
ModelDSBG-160-100-PPVA-N3
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How do I mount the DSBG-160-100-PPVA-N3 ISO cylinder correctly, and which alignment step is commonly missed?

Secure the cylinder using its standard ISO mounting pattern, then align the piston rod precisely with the load path; the step often missed is verifying parallelism with a dial gauge before final torque.

What maintenance does the DSBG-160-100-PPVA-N3 cylinder require after installation?

Inspect rod seals and cushioning annually, relubricate with Festo-approved grease every 2 000 km of travel, and replace the seal kit at the first sign of external leakage.

What is the first performance limit reached when the DSBG-160-100-PPVA-N3 runs continuous cycles?

The cushioning deceleration limit is reached first; sustained high-speed cycling overheats the end-position dampers, causing pressure spikes before seal wear becomes critical.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.