Festo
Festo DSBC-63-80-PPVA-N3 1383581 ISO Cylinder electrician tool
ISO cylinder DSBC-63-80-PPVA-N3 1383581 with 63 mm bore and 80 mm stroke for pneumatic automation
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- ISO cylinder built for reliable pneumatic motion
- 63 mm bore and 80 mm stroke suit standard automation tasks
- Red finish provides clear visual identification in panels
- Supplied as a single pack in a protective box
- Backed by three-year parts and one-year labour coverage
ISO Cylinder for Electricians
The Festo DSBC-63-80-PPVA-N3 is a pneumatic ISO cylinder supplied as test equipment for professional electricians. It arrives new in a single red box bearing part number 1383581. The unit suits installation and maintenance tasks where compressed-air actuation is required.
Thermals Noise and Power Draw
As a pneumatic device the cylinder produces no electrical heat and draws no power during operation. Noise is limited to the exhaust of compressed air and the mechanical movement of the piston. Thermal load on surrounding components remains negligible in normal use.
Upgrade Path and Fit
This cylinder replaces worn or damaged ISO units with the same 63 bore and 80 stroke dimensions. The jump is worth it when an existing actuator shows seal leakage, rod scoring or inconsistent stroke timing. It is not suited for applications needing a different bore stroke or non ISO mounting pattern.
Highlights
- ISO cylinder built for reliable pneumatic motion
- 63 mm bore and 80 mm stroke suit standard automation tasks
- Red finish provides clear visual identification in panels
- Supplied as a single pack in a protective box
- Backed by three-year parts and one-year labour coverage
Specifications
| Brand | FESTO |
|---|---|
| Model | DSBC-63-80-PPVA-N3 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I mount the DSBC-63-80-PPVA-N3 ISO cylinder and which orientation step is often missed?
Secure the cylinder using its standard ISO mounting pattern, then verify the piston rod alignment before pressurising; misaligned rod loading is the step most installers overlook.
Which wear items on the DSBC-63-80-PPVA-N3 will need replacement after extended cycles?
The piston seal, rod seal and cushioning seals are the primary wear parts; plan to inspect and replace them during scheduled maintenance intervals.
What operational limit appears first when the DSBC-63-80-PPVA-N3 runs continuously at full stroke?
Sustained high-speed cycling generates heat in the cushioning chambers, making thermal buildup the first limiting factor under continuous duty.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
