Festo
Festo DSBC-50-250-D3-PPSA-N3 3659504 ISO cylinder electrician tool
ISO cylinder with 50 mm bore and 250 mm stroke, supplied new in a single box
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- ISO-standard cylinder ensures reliable pneumatic motion
- 50 mm bore diameter provides strong force output
- 250 mm stroke length suits extended travel needs
- New condition guarantees full factory performance
- Manufacturer part 3659504 simplifies ordering and spares
ISO cylinder for electricians
The Festo DSBC-50-250-D3-PPSA-N3 is a pneumatic ISO cylinder supplied as new test equipment for electricians and maintenance technicians. It carries the manufacturer part number 3659504 and arrives in a single pack inside a box. The red finish identifies the unit in busy workshops. The product is classified under electrician tools for professional use.
Bore and stroke define the working range
The cylinder bore is 50 mm and the stroke is 250 mm, which set the force and travel available for clamping, positioning or actuation tasks. No additional accessories or software are included in the pack, so the installer must provide mounting hardware, fittings and control valves separately. The plain supply means the unit integrates into existing pneumatic circuits without proprietary add-ons.
Standard ISO mounting simplifies fitting
Installation follows common ISO cylinder patterns, so technicians familiar with the standard can mount and align the unit using typical brackets and fasteners. The main risk is incorrect port connection or missing flow controls, which cause erratic motion or seal damage. Verify the piston diameter and stroke match the application before pressurising the system.
Highlights
- ISO-standard cylinder ensures reliable pneumatic motion
- 50 mm bore diameter provides strong force output
- 250 mm stroke length suits extended travel needs
- New condition guarantees full factory performance
- Manufacturer part 3659504 simplifies ordering and spares
Specifications
| Brand | FESTO |
|---|---|
| Model | DSBC-50-250-D3-PPSA-N3 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How often will the DSBC-50-250-D3-PPSA-N3 cylinder need seal or piston replacement?
Festo ISO cylinders are built for long service intervals; with clean, dry compressed air the seals typically last millions of cycles before a rebuild kit is required.
What limits continuous duty on the DSBC-50-250-D3-PPSA-N3?
The 250 mm stroke and 50 mm bore define the air volume per cycle; sustained high-speed cycling is limited by heat buildup in the barrel and cushion seals.
How much noise and heat does the DSBC-50-250-D3-PPSA-N3 generate running all day?
The cylinder itself is nearly silent; audible noise comes from exhaust ports, and heat stays low unless cycle rate pushes air consumption beyond the compressor's cooling capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
