Festo
Festo DSBC-40-50-PPSA-N3 1376905 ISO cylinder
ISO cylinder with 40 mm bore and 50 mm stroke for pneumatic automation
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- ISO cylinder for standardised mounting
- 40 mm bore and 50 mm stroke for precise linear motion
- Festo quality with 3-year parts and 1-year labour coverage
- Red finish for quick visual identification
- Supplied as a single unit in protective box
ISO cylinder for pneumatic systems
The Festo DSBC-40-50-PPSA-N3 is an ISO-standard pneumatic cylinder designed for linear motion in automation and machinery. It suits engineers and maintenance teams who need a reliable actuator for pushing, pulling or clamping tasks. The unit arrives new in a single pack and carries a three-year parts and one-year labor guarantee. Its red finish provides clear visual identification in busy installations.
40 mm bore and 50 mm stroke
The decisive specification is the 40 mm bore combined with a 50 mm stroke, which defines the force output and travel distance available for your application. Match these dimensions exactly to the mechanical design; a different bore or stroke will not fit the same mounting pattern or deliver the required force. The model number 1376905 confirms the exact variant when ordering or cross-referencing documentation.
Normal operating thermals and air consumption
In typical service the cylinder runs at the temperature of the supplied compressed air, so ambient heat and air preparation determine thermal load. Noise is limited to the exhaust note of the control valve and the end-of-stroke cushioning, both of which are standard for ISO cylinders of this size. Power draw is not applicable because the device is purely pneumatic; the only energy cost is the compressed air consumed per cycle.
Highlights
- ISO cylinder for standardised mounting
- 40 mm bore and 50 mm stroke for precise linear motion
- Festo quality with 3-year parts and 1-year labour coverage
- Red finish for quick visual identification
- Supplied as a single unit in protective box
Specifications
| Brand | FESTO |
|---|---|
| Model | DSBC-40-50-PPSA-N3 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What does the 50 mm stroke actually give me in a working setup?
The 50 mm stroke is the linear travel distance the piston rod moves from fully retracted to fully extended, so the cylinder will push or pull a load over exactly that 50 mm range in the machine.
How does the ISO designation affect the ports and mounting holes I will use?
The ISO label indicates the cylinder conforms to the ISO standard for its bore size, meaning the port threads and mounting hole pattern follow the dimensions defined for a 40 mm bore cylinder.
What physical space and mounting hardware does the 40 mm bore cylinder need?
The cylinder body fits a 40 mm bore envelope, and its ISO mounting pattern lets you bolt it to standard ISO 40 mm bore brackets or foot mounts using the specified hole centres and rod thread.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
