Festo
Festo DSBC-40-200-D3-PPVA-N3 ISO Cylinder 40 200 3660627
ISO cylinder with 40 mm bore and 200 mm stroke for pneumatic automation systems
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- ISO-standard cylinder for reliable pneumatic motion
- 40 mm bore and 200 mm stroke for precise linear travel
- Red finish identifies the unit at a glance
- Supplied as a single pack in a protective box
- Manufacturer part 3660627 ensures exact replacement
Festo ISO Cylinder 40mm Bore
The Festo DSBC-40-200-D3-PPVA-N3 is a new ISO-standard pneumatic cylinder with a 40 millimetre bore and 200 millimetre stroke. It suits automation engineers and maintenance teams who need a reliable linear actuator for machine-building or process-control applications. Part number 3660627 identifies the exact variant.
Installation and Common Issues
Mount the cylinder using standard ISO mounting patterns and connect compressed-air ports with clean, dry tubing to avoid contamination. Misalignment between the piston rod and the load is the most frequent cause of premature seal wear, so verify parallelism before pressurising the system.
Pre-Order Checks
Confirm that your air supply delivers the pressure range required by the cylinder’s specification and that existing mounting brackets match the ISO interface. Ensure the control valve provides adequate flow for the 200 millimetre stroke length and that the operating environment is compatible with the red finish and materials used.
Highlights
- ISO-standard cylinder for reliable pneumatic motion
- 40 mm bore and 200 mm stroke for precise linear travel
- Red finish identifies the unit at a glance
- Supplied as a single pack in a protective box
- Manufacturer part 3660627 ensures exact replacement
Specifications
| Brand | FESTO |
|---|---|
| Model | DSBC-40-200-D3-PPVA-N3 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How can I verify the DSBC-40-200-D3-PPVA-N3 ISO cylinder is operating correctly after installation?
After setup, confirm the cylinder extends and retracts smoothly through its full 200 mm stroke at the rated pressure, with no air leaks at the ports or seals.
What components are included with the DSBC-40-200-D3-PPVA-N3 and what must be purchased separately?
The box contains one ISO cylinder, model DSBC-40-200-D3-PPVA-N3, part number 3660627. Fittings, tubing, mounting brackets and flow controls are not included.
Which version of the DSBC series should I choose for a 40 mm bore and 200 mm stroke requirement?
Select the DSBC-40-200-D3-PPVA-N3 variant; its model code specifies a 40 mm bore, 200 mm stroke, D3 cushioning and PPVA sealing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
