Festo
Festo ADVC-100-20-A-P-A 188342 short-stroke cylinder electrician tool
stroke cylinder with 100 mm bore and 20 mm stroke for pneumatic automation tasks
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Short 20 mm stroke fits tight spaces
- 100 mm bore delivers strong clamping force
- Red finish aids quick visual identification
- Supplied as a single pack for immediate use
- Manufacturer part 188342 ensures correct ordering
Application fit
The Festo ADVC-100-20-A-P-A is a short-stroke cylinder supplied as test equipment for pneumatic circuit verification. It suits technicians who need a compact actuator with a 100 mm bore and 20 mm stroke for bench testing or fixture prototyping. Buyers who require a longer stroke length or a different bore diameter should select an alternative model.
Thermals noise power
Pneumatic actuation produces no electrical heat, fan noise or power draw during normal operation. The cylinder relies on compressed air supplied by an external system, so thermal load and acoustic signature depend entirely on that upstream equipment. No internal power consumption or cooling requirement exists for the unit itself.
Deciding specification
The defining parameter is the 20 mm stroke combined with a 100 mm bore, identified by part number 188342. This exact stroke-to-bore ratio determines whether the cylinder fits the intended test fixture or motion profile. Confirm the required travel distance before ordering.
Highlights
- Short 20 mm stroke fits tight spaces
- 100 mm bore delivers strong clamping force
- Red finish aids quick visual identification
- Supplied as a single pack for immediate use
- Manufacturer part 188342 ensures correct ordering
Specifications
| Brand | FESTO |
|---|---|
| Model | ADVC-100-20-A-P-A |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I mount the ADVC-100-20-A-P-A short-stroke cylinder and what is the common alignment mistake?
Mount the cylinder using the 100 mm bore flange pattern, ensuring the piston rod centreline stays parallel to the load path; the frequent error is allowing angular misalignment that side-loads the rod bearing.
What maintenance does the 188342 cylinder need and when should the seal kit be replaced?
Inspect the rod wiper and piston seals annually, relubricate with Festo LUB-KC1 grease, and replace the seal kit when leakage appears or after the 3-year parts coverage period ends.
What is the first limitation of the ADVC-100-20-A-P-A during continuous cycling?
The 20 mm stroke length limits total displacement per cycle, so sustained high-frequency operation reaches the mechanical end-stop travel limit before heat or pressure ratings become critical.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
