Festo
Festo ADVC-100-10-A-P-A 188340 Short-stroke Cylinder
stroke cylinder with 10 mm stroke and 100 mm bore for compact linear motion
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Short 10 mm stroke enables precise positioning
- 100 mm bore delivers strong clamping force
- Compact short-stroke design fits tight machine spaces
- Red finish allows quick visual identification on assembly lines
- Supplied as a single unit in a protective box
stroke cylinder 100 mm bore
The Festo ADVC-100-10-A-P-A is a compact pneumatic actuator with a 100 mm bore and 10 mm stroke. It converts compressed air into precise linear motion for automation tasks. The unit is supplied new in a single pack, ready for installation.
Automation systems needing short linear travel
This cylinder suits machines where space is limited and only a short push or pull stroke is required. It is not intended for applications needing longer travel distances or rotary actuation. Buyers who need adjustable stroke lengths should look at alternative designs.
10 mm stroke length
The defining specification is the 10 mm stroke, which determines the maximum linear displacement per cycle. Verify that this travel distance matches the mechanical requirement of your application before ordering.
Highlights
- Short 10 mm stroke enables precise positioning
- 100 mm bore delivers strong clamping force
- Compact short-stroke design fits tight machine spaces
- Red finish allows quick visual identification on assembly lines
- Supplied as a single unit in a protective box
Specifications
| Brand | FESTO |
|---|---|
| Model | ADVC-100-10-A-P-A |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What bore diameter must the ADVC-100-10-A-P-A cylinder match for mounting?
The cylinder has a 100 mm bore, so the mounting surface and load must align with that bore size.
Which ports on the 188340 short-stroke cylinder accept the air supply lines?
Connect compressed air to the G 1/8 ports on the cylinder body; the common mistake is cross-threading the fittings.
When should the piston seals on this Festo short-stroke cylinder be inspected?
Plan a seal check after three years of service or sooner if leakage appears at the rod or end caps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
