We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 female to XT30 male adapter with short cable

Fervit

Fervit XT60 to XT30 Adapter SC100

SKU CH-QPFP-R65ER

XT60 to XT30 adapter connects FPV drones, RC vehicles and TS100 soldering irons to XT60 batteries with a compact balanced-line design

  • Powers TS100 soldering iron from XT60 battery ports
  • Connects XT30 devices to XT60 sources for field repairs
  • Compact split balanced line saves space in FPV builds
  • Works with most LiPo chargers on the market
  • High-temperature resistant insulation ensures safe plug-and-play use

Fervit XT60 to XT30 Adapter SC100

This adapter connects an XT60 female port to an XT30 male plug. It suits FPV pilots, drone builders and hobbyists powering TS100 soldering irons from flight batteries. The compact layout separates the XT30 connector from the balance lead for a tighter fit. It works with most common LiPo chargers on the market.

XT30 connector separated from balance line

The physical separation keeps the adapter slim inside crowded frames or battery compartments. Plug-and-play operation means no soldering or crimping is required at the field. High-temperature materials and solid insulation survive repeated connection cycles. The bundle changes nothing electrically; it only bridges the two connector standards.

Plug-and-play field installation

Alignment is straightforward because both connectors are keyed, so reverse polarity is unlikely. The main risk is forcing an XT30 into a mismatched socket or using undersized wire on the load side. Ensure the battery can deliver the current your iron or device draws. No tools are needed beyond the adapter itself.

Highlights

  • Powers TS100 soldering iron from XT60 battery ports
  • Connects XT30 devices to XT60 sources for field repairs
  • Compact split balanced line saves space in FPV builds
  • Works with most LiPo chargers on the market
  • High-temperature resistant insulation ensures safe plug-and-play use

Specifications

BrandFervit

Questions about this item

Will the XT30 connector need replacing after repeated field repairs?

The XT30 connector uses high-temperature-resistant material and good insulation for durability, but replacement timing depends on how often you plug and unplug during field repairs.

What current limit appears first when running a TS100 soldering iron from an XT60 battery through this adapter?

The XT30 connector is rated for 30 A, so that limit will be reached before the XT60 side's 60 A rating when powering a TS100 soldering iron continuously.

Does the adapter get hot or draw extra power when left connected to a lipo battery all day?

High-quality materials and good insulation minimise heat build-up, and the plug-and-play design adds no active circuitry that would increase power draw during all-day connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.