We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow XT60 male plug to silver DC 7.4x5.0mm male barrel connector on short black cable

Fervit

Fervit XT60 Male to DC 7.4x5.0mm Male Power Adapter

SKU CH-HJX3-T877Y

XT60 male to DC 7.4×5.0 mm male adapter powers TS100 soldering irons and FPV gear from XT60 battery packs

  • Connect TS100 soldering iron to XT60 battery for field repairs
  • Power FPV drones, solar cells, vehicles and RC toys from XT60 source
  • XT60 male to DC 7.4x5.0mm male connector enables direct plug-and-play use
  • High-temperature resistant materials with good insulation ensure safe operation
  • SC100 protocol support allows fast charging up to 100 W through 60 A rated connector

XT60 to 7.4×5.0 mm DC adapter for TS100

This adapter connects a TS100 soldering iron to any XT60-equipped battery pack. It is intended for FPV pilots, drone builders and field technicians who need a portable power source for soldering repairs. The 7.4×5.0 mm barrel fits the TS100 input directly. No additional cables or converters are required.

Check battery voltage and current capability

The TS100 demands a supply that can deliver its rated voltage and sufficient amperage for the selected tip temperature. Verify that your LiPo or other XT60 source matches the iron’s input range before connecting. Ensure the pack’s discharge rating can sustain the load without excessive voltage sag. Polarity at the XT60 end follows the standard convention used on RC packs.

High-temperature resistant housing

The moulded body uses materials rated for elevated temperatures and provides solid insulation between contacts. Both connectors seat firmly, reducing the chance of accidental disconnection during vibration-heavy flight-line use. The XT60 male plug locks into the battery while the DC male barrel inserts cleanly into the iron. This construction supports repeated field cycles without degrading contact integrity.

Highlights

  • Connect TS100 soldering iron to XT60 battery for field repairs
  • Power FPV drones, solar cells, vehicles and RC toys from XT60 source
  • XT60 male to DC 7.4x5.0mm male connector enables direct plug-and-play use
  • High-temperature resistant materials with good insulation ensure safe operation
  • SC100 protocol support allows fast charging up to 100 W through 60 A rated connector

Specifications

BrandFervit

Questions about this item

What comes in the box and do I need any extra cables for my TS100 iron?

The package contains the XT60 male to DC 7.4×5.0 mm male adapter itself. No extra cable is required — the adapter plugs straight between your XT60-equipped battery and the TS100 soldering iron's DC input.

Which version of this adapter should I choose for a TS100 soldering iron?

Select the XT60 male to DC 7.4×5.0 mm male variant; it matches the TS100's DC jack and the XT60 output found on most FPV flight batteries.

What does the SC100 designation mean when I use this adapter with a 6S LiPo in the field?

SC100 indicates the adapter supports up to 100 W power delivery, so a 6S LiPo can run the TS100 at its full 60 W rating without overheating the connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.